Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-04-29-30
Project Information
Project Identifiers | Project ID: 994588 DEA: 081H3904 EFIS: 0817000032 |
---|---|
DIST-CO-RTE-PM | 08-SBD-15-R20.5/R21.6,R25.5/R30.7 |
Award Date | 07/13/2023 |
Closeout Date | Not set |
Work Description | CONSTRUCT BUILDING, ROADWAY EXC, JPCP, AND TEMPORARY BARRIER SYSTEM. |
Location Description | SAN BERNARDINO COUNTY FROM 0.6 MILE NORTH OF CLEGHORN ROAD UNDERCROSSING TO 0.5 MILE SOUTH OF ROUTE 138 AND FROM 0.5 MILE SOUTH OF TRUCK SAFETY CHECK AREA TO 0.4 MILE NORTH OF OAK HILL ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 08/02/2023) |
Sample Information
Sample Taken Date | 04/29/2024 | Sample Unique Key | 30 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/30/2024 |
Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP R15 0.75% LAS |
The quantity of what the sample constitutes | 4 Bags Of Bin Agg., 1 Bag Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | G | Last name of sampler or witnessed by | Ramirez |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0206A-24 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan - Oro Grande | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0022, 91-36-0046 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan Oro Grande Plant | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 224112A ORO SJR | Lot number | |
Sublot number | Aggregate Mix Number |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2024-04-29-30-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Larry Diaz/David Padilla, CT D08 - Fontana Southern Regional Laboratory | 05/04/2024 | Satish Jain | No | Combined Virgin Aggregate Gradation | Info | |
2024-04-29-30-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 05/04/2024 | Satish Jain | No | Info | ||
2024-04-29-30-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 05/03/2024 | Satish Jain | No | Info | ||
2024-04-29-30-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Amir Sarder, CT D08 - Fontana Southern Regional Laboratory | 05/03/2024 | Satish Jain | No | Info | ||
2024-04-29-30-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 05/02/2024 | Satish Jain | No | Info | ||
2024-04-29-30-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/10/2024 | Satish Jain | No | Info | ||
2024-04-29-30-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/10/2024 | Satish Jain | No | Info | ||
2024-04-29-30-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/10/2024 | Satish Jain | No | Info | ||
2024-04-29-30-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/09/2024 | Satish Jain | No | Rap Gradation After Ignition | Info | |
2024-04-29-30-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz/David Padilla/S Jain, CT D08 - Fontana Southern Regional Laboratory | 05/10/2024 | Satish Jain | No | Comb. Virgin Agg. Gradation W/Rap Gradation Correlation Factors | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2024-04-29-30-1 AASHTO T27-14
DIME Test ID: 2024-04-29-30-2 AASHTO T84-14
DIME Test ID: 2024-04-29-30-3 AASHTO T85-13
DIME Test ID: 2024-04-29-30-4 AASHTO T96-02r10
DIME Test ID: 2024-04-29-30-5 AASHTO T176-08
DIME Test ID: 2024-04-29-30-6 AASHTO T304-11
DIME Test ID: 2024-04-29-30-7 AASHTO T335-09r13
DIME Test ID: 2024-04-29-30-8 ASTM D4791-10
DIME Test ID: 2024-04-29-30-9 CTM 202-November 2011
DIME Test ID: 2024-04-29-30-10 CTM 202-November 2011