Sample Record

Owner Lab

  • CT D08 - Fontana Field Testing Laboratory

DIME Sample ID 2024-01-29-40

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994588
DEA: 081H3904
EFIS: 0817000032
DIST-CO-RTE-PM08-SBD-15-R20.5/R21.6,R25.5/R30.7
Award Date07/13/2023
Closeout DateNot set
Work DescriptionCONSTRUCT BUILDING, ROADWAY EXC, JPCP, AND TEMPORARY BARRIER SYSTEM.
Location DescriptionSAN BERNARDINO COUNTY FROM 0.6 MILE NORTH OF CLEGHORN ROAD UNDERCROSSING TO 0.5 MILE SOUTH OF ROUTE 138 AND FROM 0.5 MILE SOUTH OF TRUCK SAFETY CHECK AREA TO 0.4 MILE NORTH OF OAK HILL ROAD OVERCROSSING
QA Service Level1 (Verified on 08/02/2023)

Sample Information

Sample Taken Date01/29/2024 Sample Unique Key40
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/29/2024
Sample typeDepartment Acceptance A brief description of the sample1"xNo.4 PCC
The quantity of what the sample constitutes10 CY From where was the sample collectedFabricator
First name of sampler or witnessed byMaryanna Last name of sampler or witnessed byLandaverde
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameHi-Grade Materials Co. - Oro Grande Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-36-0046
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedConveyor Belt at Plant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1 inch
The concrete mix design numberCT590F25A Lot number
Sublot number Aggregate Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2024-01-29-40-1CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesRobert Jarquin, CT D08 - Fontana Field Testing Laboratory01/31/2024Maryanna Landaverde
Yes
02/20/20241 in. x No. 4
2024-01-29-40-2CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesRobert Jarquin, CT D08 - Fontana Field Testing Laboratory01/31/2024Maryanna Landaverde
Yes
02/20/20243/8" x No. 8
2024-01-29-40-3CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesRobert Jarquin, CT D08 - Fontana Field Testing Laboratory01/31/2024Maryanna Landaverde
Yes
02/20/2024WCS
2024-01-29-40-4CTM 217-June 2011: Method of Test for Sand EquivalentRobert Jarquin, CT D08 - Fontana Field Testing Laboratory01/31/2024Maryanna Landaverde
Yes
02/20/2024
2024-01-29-40-5CTM 226-July 2010: Method of Test for Determination of Moisture Content of Soils and Aggregates by Oven DryingRobert Jarquin, CT D08 - Fontana Field Testing Laboratory01/31/2024Maryanna Landaverde
Yes
04/05/2024WCS

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-01-29-40-1 CTM 202-November 2011 (Verified)
DIME Test ID: 2024-01-29-40-2 CTM 202-November 2011 (Verified)
DIME Test ID: 2024-01-29-40-3 CTM 202-November 2011 (Verified)
DIME Test ID: 2024-01-29-40-4 CTM 217-June 2011 (Verified)
DIME Test ID: 2024-01-29-40-5 CTM 226-July 2010 (Verified)