Sample Record

Owner Lab

  • CT HQ - QASI Bay Area Field Office

DIME Sample ID 2023-09-19-8

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994486
DEA: 051Q0804
EFIS: 0522000148
DIST-CO-RTE-PM05-SCR,SCR/SCR-9,1-17.41/17.5
Award DateNot set
Closeout DateNot set
Work DescriptionRepair of viaduct barrier wall and replace CIDH piles. Holiday Lane Viaduct Slipout. State Route 9 at PM SCR-09-8.4 Jay's Slide, and SR 236 (SCR-236-16.87)
Location DescriptionSanta Cruz County. State Route 9 at PM SCR-09-8.4 and SR 236 (SCR-236-16.87)
QA Service Level1 (Verified on 02/13/2023)

Sample Information

Sample Taken Date09/19/2023 Sample Unique Key8
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/22/2023
Sample typeQuality Assurance A brief description of the sample1-1/4" A563-DH hex Bolt HDG
The quantity of what the sample constitutes386 From where was the sample collectedFabricator
First name of sampler or witnessed byDavid Last name of sampler or witnessed byLund
Title of samplerCT METS QA INSPECTOR Telephone number of sampler385-452-2398
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameUniversal Industrial Sales Inc Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB390-177-23 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)na
Heat Number(s)223882 Nut Mfg. Lot Number(s)37825-223882
Washer Mfg. Lot Number(s)na Bolt Specificationna
Bolt Length(s)na Nut SpecificationA563-DH
Washer Specificationna FinishHDG
Diameter/Size1-1/4" Bolt Mfg. Lot Numberna
Rocap Test Requirement(s)na Lubricant Requirements(s)Wax Dye

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-09-19-8-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)<None>, CT HQ - Sacramento Structural Materials Testing Laboratory09/22/2023<None>
Yes
09/22/2023Proof Load
2023-09-19-8-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)<None>, CT HQ - Sacramento Structural Materials Testing Laboratory09/22/2023<None>
Yes
09/22/2023Proof Load
2023-09-19-8-3ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory09/22/2023Andrew Auvinen
Yes
09/22/2023
2023-09-19-8-4ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory09/22/2023Andrew Auvinen
Yes
09/22/2023
2023-09-19-8-5ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory09/22/2023Andrew Auvinen
Yes
09/22/2023
2023-09-19-8-6ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory09/22/2023Andrew Auvinen
Yes
09/22/2023
2023-09-19-8-7ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory09/22/2023Andrew Auvinen
Yes
09/22/2023
2023-09-19-8-8ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory09/22/2023Andrew Auvinen
Yes
09/22/2023

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-09-19-8-1 ASTM F606-21 (Verified)
DIME Test ID: 2023-09-19-8-2 ASTM F606-21 (Verified)
DIME Test ID: 2023-09-19-8-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-09-19-8-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-09-19-8-5 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-09-19-8-6 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-09-19-8-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-09-19-8-8 ASME B1.2-83r17 (Verified)