DIME - Sample Record for DIME Sample ID 2023-08-15-79

DIME » All Projects » Project - DEA: 112N1214 » Sample 2023-08-15-79 » Sample Details

Sample Record

Owner Lab

CT D11 - District 11 Materials Laboratory

DIME Sample ID 2023-08-15-79

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 994611 DEA: 112N1214 EFIS: 1121000171
DIST-CO-RTE-PM	11-SD-94-39.0/R49.9
Award Date	06/06/2023
Closeout Date	Not set
Work Description	MICROSURFACING, SHOULDER BACKING, RUMBLE STRIP, & STRIPING.
Location Description	SAN DIEGO NEAR POTRERO AND CANYON CITY FROM JUNCTION ROUTE 188 TO 3 MILES EAST OF CAMPO CREEK BRIDGE (BR NO. 57-0118)
QA Service Level	1 (Verified on 07/18/2023)

Sample Information

Sample Taken Date	08/15/2023	Sample Unique Key	79
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/15/2023
Sample type	Quality Assurance	A brief description of the sample	1/2" HMA-A
The quantity of what the sample constitutes	24 boxes 6 bags	From where was the sample collected	Source
First name of sampler or witnessed by	Ben	Last name of sampler or witnessed by	Smith
Title of sampler		Telephone number of sampler
Laboratory sample identification	9101-PSU	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Otay	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-37-0035
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2023-08-15-79-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/15/2023	Daniel Smith	Yes	09/27/2023
2023-08-15-79-2	AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/15/2023	Daniel Smith	Yes	09/27/2023	RAP Rice
2023-08-15-79-3	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/15/2023	Daniel Smith	Yes	09/27/2023
2023-08-15-79-4	AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/18/2023	Daniel Smith	Yes	09/27/2023
2023-08-15-79-5	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/15/2023	Daniel Smith	Yes	09/27/2023
2023-08-15-79-6	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/18/2023	Daniel Smith	Yes	09/27/2023
2023-08-15-79-7	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/15/2023	Daniel Smith	Yes	09/27/2023
2023-08-15-79-8	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/15/2023	Daniel Smith	Yes	09/27/2023
2023-08-15-79-9	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/15/2023	Daniel Smith	Yes	09/27/2023
2023-08-15-79-10	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Daniel Smith, CT D11 - District 11 Materials Laboratory	09/18/2023	Daniel Smith	Yes	09/27/2023

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-08-15-79-1 AASHTO T27-14 (Verified)
DIME Test ID: 2023-08-15-79-2 AASHTO T209-22 (Verified)
DIME Test ID: 2023-08-15-79-3 AASHTO T176-08 (Verified)
DIME Test ID: 2023-08-15-79-4 AASHTO T30-19 (Verified)
DIME Test ID: 2023-08-15-79-5 AASHTO T304-11 (Verified)
DIME Test ID: 2023-08-15-79-6 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-08-15-79-7 AASHTO T84-14 (Verified)
DIME Test ID: 2023-08-15-79-8 AASHTO T85-13 (Verified)
DIME Test ID: 2023-08-15-79-9 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-08-15-79-10 ASTM D4791-10 (Verified)
DIME Test ID: 2023-08-15-79-11 CTM 204-June 2010 (Verified)