Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2023-02-02-25
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 213707 DEA: 081C38U4 EFIS: 0817000196 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-10-6.7/R25.1 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Remove concrete pavement and base, and place HMA and JPCP |
| Location Description | ROUTE 10/60 SEPARATION IN BEAUMONT TO ROUTE 10/111 SEPARATION NEAR CABAZON. |
| QA Service Level | 1 (Verified on 01/09/2020) |
Sample Information
| Sample Taken Date | 02/02/2023 | Sample Unique Key | 25 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/07/2023 |
| Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP R24 0.5% LAS |
| The quantity of what the sample constitutes | 8 Bags Of Virgin Agg., 2 Bags Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | K | Last name of sampler or witnessed by | Patel |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0138A-23 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | California Commercial Asphalt - Coachella | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA or name of Pit) | 91-33-0084 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | 43417615 | A detailed description of where the material sample was collected | Belt Cut at California Commercial Asphalt Coachella |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2023-02-02-25-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/David Padilla | CT D08 - Fontana Southern Regional Laboratory | 02/11/2023 | Satish Jain | No | Combined Virgin Aggregate Gradation | Info | |
| 2023-02-02-25-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Amir Behjati | CT D08 - Fontana Southern Regional Laboratory | 02/10/2023 | Satish Jain | No | Info | ||
| 2023-02-02-25-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz | CT D08 - Fontana Southern Regional Laboratory | 02/09/2023 | Satish Jain | No | Info | ||
| 2023-02-02-25-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Larry Diaz | CT D08 - Fontana Southern Regional Laboratory | 02/14/2023 | Satish Jain | No | Info | ||
| 2023-02-02-25-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Zaid. A | CT D08 - Fontana Southern Regional Laboratory | 02/09/2023 | Satish Jain | No | Info | ||
| 2023-02-02-25-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | 02/14/2023 | Satish Jain | No | Info | ||
| 2023-02-02-25-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | 02/14/2023 | Satish Jain | No | Info | ||
| 2023-02-02-25-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | 02/14/2023 | Satish Jain | No | Info | ||
| 2023-02-02-25-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | 02/14/2023 | Satish Jain | No | Rap Gradation After Ignition | Info | |
| 2023-02-02-25-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/David Padilla | CT D08 - Fontana Southern Regional Laboratory | 02/14/2023 | Satish Jain | No | Comb. Agg. Grading W/Rap Grading Correlation Factors | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2023-02-02-25-1 AASHTO T27-14
DIME Test ID: 2023-02-02-25-2 AASHTO T84-14
DIME Test ID: 2023-02-02-25-3 AASHTO T85-13
DIME Test ID: 2023-02-02-25-4 AASHTO T96-02r10
DIME Test ID: 2023-02-02-25-5 AASHTO T176-08
DIME Test ID: 2023-02-02-25-6 AASHTO T304-11
DIME Test ID: 2023-02-02-25-7 AASHTO T335-09r13
DIME Test ID: 2023-02-02-25-8 ASTM D4791-10
DIME Test ID: 2023-02-02-25-9 CTM 202-November 2011
DIME Test ID: 2023-02-02-25-10 CTM 202-November 2011