Sample Record
Owner Lab
- CT HQ - Sacramento Cement Testing Laboratory
DIME Sample ID 2022-07-21-3
Project Information
Project Identifiers | Project ID: 8801 DEA: AML-CEM EFIS: AML-CEM |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for Cementitious Materials for use in Concrete Authorized Material List (AML) |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 07/21/2022 | Sample Unique Key | 3 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/21/2022 |
Sample type | Annual Source Testing | A brief description of the sample | Blended cement |
The quantity of what the sample constitutes | 1 Bucket | From where was the sample collected | Source |
First name of sampler or witnessed by | na | Last name of sampler or witnessed by | na |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | CM225246 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | CPC Mojave IL Cement | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Cementitious | Brand | CalPortland |
---|---|---|---|
Mill | Mojave | Type of Cementitious Material | Blended Cement |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2022-07-21-3-2 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 07/28/2022 | Benjamin Lenz | No | Info | ||
2022-07-21-3-3 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 08/01/2022 | Benjamin Lenz | No | Info | ||
2022-07-21-3-4 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 08/22/2022 | Benjamin Lenz | No | Specimen 2 was eliminated from the average for being outside allowable limits per Section 12 of ASTM C109 | Info | |
2022-07-21-3-5 | ASTM C185-15a: Standard Test Method for Air Content of Hydraulic Cement Mortar | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 08/02/2022 | Benjamin Lenz | No | Info | ||
2022-07-21-3-6 | ASTM C191-13: Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 08/09/2022 | Benjamin Lenz | No | Info | ||
2022-07-21-3-7 | ASTM C204-11: Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 07/25/2022 | Benjamin Lenz | No | Info | ||
2022-07-21-3-8 | ASTM C430-8: Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 09/21/2022 | Benjamin Lenz | No | Info | ||
2022-07-21-3-9 | ASTM C188-15: Standard Test Method for Density of Hydraulic Cement | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 09/21/2022 | Benjamin Lenz | No | Info | ||
2022-07-21-3-10 | ASTM C187-16: Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste (Water Normal Consistency) | Anthony Valdez, CT HQ - Sacramento Cement Testing Laboratory | 08/09/2022 | Benjamin Lenz | No | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2022-07-21-3-2 ASTM C109-16a
DIME Test ID: 2022-07-21-3-3 ASTM C109-16a
DIME Test ID: 2022-07-21-3-4 ASTM C109-16a
DIME Test ID: 2022-07-21-3-5 ASTM C185-15a
DIME Test ID: 2022-07-21-3-6 ASTM C191-13
DIME Test ID: 2022-07-21-3-7 ASTM C204-11
DIME Test ID: 2022-07-21-3-8 ASTM C430-8
DIME Test ID: 2022-07-21-3-9 ASTM C188-15
DIME Test ID: 2022-07-21-3-10 ASTM C187-16