Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2022-05-09-39
Project Information
Project Identifiers | Project ID: 212112 DEA: 080C2514 EFIS: 0816000076 COOP: 081645 |
---|---|
DIST-CO-RTE-PM | 08-SBD-10-0.0/13.2 |
Award Date | 06/06/2018 |
Closeout Date | Not set |
Work Description | Design-Build of I-10 Corridor Contract 1 - Adding 2 new Express Lanes |
Location Description | LA/SBD County Line to PM 13.2 near I-15 |
QA Service Level | 1 (Verified on 10/16/2019) |
Sample Information
Sample Taken Date | 05/09/2022 | Sample Unique Key | 39 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/18/2022 |
Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP R15 0.5% LAS |
The quantity of what the sample constitutes | 2 Bags Combined Agg., 1 Bag Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Vulcan | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0296A-22 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Materials-Irwindale | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | 224112A IRW SJR | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials-Irwindale |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Lot number | 3 | |
Sublot number | 15 | Aggregate Mix Number | Not set |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2022-05-09-39-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Angels Toledo/Robert Jarquin, CT D08 - Fontana Southern Regional Laboratory | 05/20/2022 | Satish Jain | Yes | 07/12/2022 | Combined Virgin Aggregate Gradation | |
2022-05-09-39-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 05/21/2022 | Satish Jain | Yes | 07/12/2022 | ||
2022-05-09-39-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 05/20/2022 | Satish Jain | Yes | 07/12/2022 | ||
2022-05-09-39-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 05/21/2022 | Satish Jain | Yes | 07/12/2022 | ||
2022-05-09-39-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 05/20/2022 | Satish Jain | Yes | 07/12/2022 | ||
2022-05-09-39-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/22/2022 | Satish Jain | Yes | 07/12/2022 | ||
2022-05-09-39-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/22/2022 | Satish Jain | Yes | 07/12/2022 | ||
2022-05-09-39-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/22/2022 | Satish Jain | Yes | 07/12/2022 | ||
2022-05-09-39-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 05/21/2022 | Satish Jain | Yes | 07/12/2022 | Rap Gradation After Ignition | |
2022-05-09-39-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Angels Toledo/Robert Jarquin, CT D08 - Fontana Southern Regional Laboratory | 05/25/2022 | Satish Jain | No | Combined Aggregate Gradation W/Rap Gradation Correlation Factors | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2022-05-09-39-1 AASHTO T27-14 (Verified)
DIME Test ID: 2022-05-09-39-2 AASHTO T84-14 (Verified)
DIME Test ID: 2022-05-09-39-3 AASHTO T85-13 (Verified)
DIME Test ID: 2022-05-09-39-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2022-05-09-39-5 AASHTO T176-08 (Verified)
DIME Test ID: 2022-05-09-39-6 AASHTO T304-11 (Verified)
DIME Test ID: 2022-05-09-39-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2022-05-09-39-8 ASTM D4791-10 (Verified)
DIME Test ID: 2022-05-09-39-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2022-05-09-39-10 CTM 202-November 2011