Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2021-05-19-28
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 7613
DEA: 071218W4
EFIS: 0700021119 |
|---|
| DIST-CO-RTE-PM | 07-LA-5-29.4/31.6 |
|---|
| Award Date | 11/29/2012 |
|---|
| Closeout Date | Not set |
|---|
| Work Description | REALIGN ROUTE 5 AND RAILROAD TRACKS AND RECONFIGURE ON- AND OFF-RAMPS. |
|---|
| Location Description | LOS ANGELES COUNTY IN BURBANK FROM WEST MAGNOLIA BOULEVARD OVERCROSSING TO 0.3 MILE NORTH OF BUENA VISTA STREET/WINONA AVENUE UNDERCROSSING |
|---|
| QA Service Level | 1 (Verified on 10/08/2012) |
|---|
Sample Information
| Sample Taken Date | 05/19/2021 |
Sample Unique Key | 28 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/26/2021 |
|---|
| Sample type | Verification |
A brief description of the sample | PSUE 3/4" HMA-A R10, 0.5% LAS |
|---|
| The quantity of what the sample constitutes | 10 Bags of Aggregate, 2 Bags of RAP |
From where was the sample collected | Manufacturer |
|---|
| First name of sampler or witnessed by | Thomas |
Last name of sampler or witnessed by | Shivers |
|---|
| Title of sampler | |
Telephone number of sampler | |
|---|
| Laboratory sample identification | 0298A-21 |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Vulcan - Sun Valley |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
|---|
| Structure name | |
|---|
Material Information
| Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | 91-19-0035::FISH CANYON QUARRY |
|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A R10 |
The fabricator/manufacturer designation for the sample | |
|---|
| The plant number | 220805 SVA VLO |
A detailed description of where the material sample was collected | Belt Cut at Vulcan Sun Valley Plant |
|---|
| Where the material sample would have been placed if not sampled | Asphalt Paving |
Primary Aggregate Nominal Size | 3/4 inch |
|---|
| The concrete mix design number | |
Lot number | |
|---|
| Sublot number | |
JMF Verification ID | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-05-19-28-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/Juan Leroy | CT - Southern Regional Laboratory | 05/26/2021 | Satish Jain | Yes | 06/08/2021 | Combined Virgin Aggregate Gradation |
|
| 2021-05-19-28-2 | CTM 205-December 2010: Method of Test for Determining Percentage of Crushed Particles | Michael Magana | CT - Southern Regional Laboratory | 06/02/2021 | Satish Jain | Yes | 06/08/2021 | 1 Face 99% Crushed & 2 Face 98% Crushed |
|
| 2021-05-19-28-3 | CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Larry Diaz | CT - Southern Regional Laboratory | 06/02/2021 | Satish Jain | Yes | 06/08/2021 | |
|
| 2021-05-19-28-4 | CTM 207-March 2012: Method of Test for Specific Gravity and Absorption of Fine Aggregate | Danilo Ferrer | CT - Southern Regional Laboratory | 05/27/2021 | Satish Jain | Yes | 06/08/2021 | |
|
| 2021-05-19-28-5 | CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Friday Ofoegbu | CT - Southern Regional Laboratory | 05/27/2021 | Satish Jain | Yes | 06/08/2021 | |
|
| 2021-05-19-28-6 | CTM 217-June 2011: Method of Test for Sand Equivalent | Satish Jain | CT - Southern Regional Laboratory | 05/28/2021 | Satish Jain | Yes | 06/08/2021 | |
|
| 2021-05-19-28-7 | CTM 234-August 2010: Method of Test for Uncompacted Void Content of Fine Aggregates | Michael Magana | CT - Southern Regional Laboratory | 06/02/2021 | Satish Jain | Yes | 06/08/2021 | |
|
| 2021-05-19-28-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Michael Magana | CT - Southern Regional Laboratory | 06/02/2021 | Satish Jain | Yes | 06/08/2021 | |
|
| 2021-05-19-28-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain | CT - Southern Regional Laboratory | 05/28/2021 | Satish Jain | Yes | 06/08/2021 | Rap Gradation After Ignition |
|
| 2021-05-19-28-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/Juan Leroy | CT - Southern Regional Laboratory | 06/02/2021 | Satish Jain | Yes | 06/08/2021 | Combined RAP/Virgin Aggregate Gradation W/Correlation Factors Applied |
|
114218114219114220114221114222114223114224114225114226114227
