Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2021-01-21-10
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 214601
DEA: 041J5694
EFIS: 0419000313 |
|---|
| DIST-CO-RTE-PM | 04-SM-101-0.0/21.8 |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Barrier modifications, overhead signs, freeway lighting and electronic toll system components |
|---|
| Location Description | SANTA CLARA AND SAN MATEO COUNTIES FROM 0.3 MILE NORTH OF SAN ANTONIO ROAD TO 0.3 MILE SOUTH OF GRAND AVENUE INTERCHANGE |
|---|
| QA Service Level | 1 (Verified on 02/21/2020) |
|---|
Sample Information
| Sample Taken Date | 01/21/2021 |
Sample Unique Key | 10 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 01/27/2021 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | HS Bolt Assembly |
|---|
| The quantity of what the sample constitutes | 115 fastener assemblies |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Stacey |
Last name of sampler or witnessed by | Davis |
|---|
| Title of sampler | QAI |
Telephone number of sampler | 562 480-6984 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Structural and Steel Products |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B362-002-21 |
Structure unique identifier | |
|---|
| Structure name | Overhead Sign Structures |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 123020A |
|---|
| Heat Number(s) | 10020173820 |
Nut Mfg. Lot Number(s) | 414845B |
|---|
| Washer Mfg. Lot Number(s) | D9266 |
Bolt Specification | ASTM F3125, Gr A325 |
|---|
| Bolt Length(s) | 2" |
Nut Specification | ASTM F563 Gr DH |
|---|
| Washer Specification | ASTM F436 |
Finish | MG B695, Class 55 |
|---|
| Diameter/Size | 1/2" |
Bolt Mfg. Lot Number | 432497A |
|---|
| Rocap Test Requirement(s) | Yes |
Lubricant Requirements(s) | Yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2021-01-21-10-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/01/2021 | spaine | Yes | 02/04/2021 | A325 Wedge Tensile |
|
| 2021-01-21-10-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | spaine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/02/2021 | spaine | Yes | 02/04/2021 | Nut Proof Load |
|
| 2021-01-21-10-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/04/2021 | Steven Paine | Yes | 02/04/2021 | |
|
| 2021-01-21-10-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/04/2021 | Steven Paine | Yes | 02/04/2021 | |
|
| 2021-01-21-10-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/04/2021 | Steven Paine | Yes | 02/04/2021 | |
|
| 2021-01-21-10-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/04/2021 | Steven Paine | Yes | 02/04/2021 | |
|
| 2021-01-21-10-7 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/04/2021 | Steven Paine | Yes | 02/04/2021 | |
|
| 2021-01-21-10-8 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/04/2021 | Steven Paine | Yes | 02/04/2021 | |
|
| 2021-01-21-10-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/04/2021 | Steven Paine | Yes | 02/04/2021 | |
|
| 2021-01-21-10-10 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/04/2021 | Steven Paine | Yes | 02/04/2021 | |
|
103790103862104009104010104011104012104013104014104015104016
