Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2020-12-11-3

Sample is locked from editing. info

Project Information

Project Identifiers
DEA: No Project
DIST-CO-RTE-PM---
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date12/11/2020 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/22/2020
Sample typeVerification A brief description of the sample1-1/4" Fully Threaded Stud with Nuts and Washers
The quantity of what the sample constitutes228 From where was the sample collectedManufacturer
First name of sampler or witnessed byKen Last name of sampler or witnessed byVarela
Title of samplerAssociate Steel Inspector Telephone number of sampler(562) 440-7716
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameA and M Nut and Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormL08-124-20 Structure unique identifier
Structure nameStock

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)N/A
Heat Number(s)1202013385 Nut Mfg. Lot Number(s)32764-75078629
Washer Mfg. Lot Number(s)D9456 Bolt SpecificationASTM F1554 Gr 55
Bolt Length(s)13" Nut SpecificationASTM A563
Washer SpecificationASTM F436 FinishHDG
Diameter/Size1-1/4" Bolt Mfg. Lot NumberA and Nut and Bolt
Rocap Test Requirement(s)No Lubricant Requirements(s)No

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-12-11-3-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/29/2020spaine
Yes
01/04/2021Nut Proof Load
2020-12-11-3-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/29/2020spaine
Yes
01/04/2021Nut Proof Load
2020-12-11-3-3ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/30/2020spaine
Yes
01/04/2021
2020-12-11-3-4ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/30/2020spaine
Yes
01/04/2021
2020-12-11-3-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/30/2020Steven Paine
Yes
01/04/2021
2020-12-11-3-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/30/2020Steven Paine
Yes
01/04/2021
2020-12-11-3-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/30/2020Steven Paine
Yes
01/04/2021
2020-12-11-3-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/30/2020Steven Paine
Yes
01/04/2021
2020-12-11-3-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/30/2020Steven Paine
Yes
01/04/2021
2020-12-11-3-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/30/2020Steven Paine
Yes
01/04/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-12-11-3-1 ASTM F606-14a (Verified)
DIME Test ID: 2020-12-11-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2020-12-11-3-3 ASTM A370-15 (Verified)
DIME Test ID: 2020-12-11-3-4 ASTM A370-15 (Verified)
DIME Test ID: 2020-12-11-3-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-12-11-3-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-12-11-3-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-12-11-3-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-12-11-3-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-12-11-3-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-12-11-3-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-12-11-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-12-11-3-13 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-14 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-15 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-16 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-17 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-18 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-19 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-20 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-21 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-22 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-23 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-24 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-25 ASTM B499-14 (Verified)
DIME Test ID: 2020-12-11-3-26 ASTM E18-15 (Verified)
DIME Test ID: 2020-12-11-3-27 ASTM E18-15 (Verified)
DIME Test ID: 2020-12-11-3-28 ASTM E18-15 (Verified)