Owner Lab
- CT HQ - Hot Mix Asphalt Laboratory
DIME Sample ID 2019-11-15-20
Sample is locked from editing. info
Project Information
Project Identifiers | DEA: No Project |
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 11/15/2019 |
Sample Unique Key | 20 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 11/15/2019 |
Sample type | Verification |
A brief description of the sample | Plant Produced 1/2-inch Type A HMA (eq. PG 64-10) |
The quantity of what the sample constitutes | JMF Verification |
From where was the sample collected | Source |
First name of sampler or witnessed by | Adam |
Last name of sampler or witnessed by | Zeither |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Pleasanton |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Hot Mix Asphalt |
HMA Type | Type A HMA |
HMA Grading | 1/2 inch |
Lot number | Unknown |
Sublot number | Unknown |
JMF Verification ID | JMF3513-2019-80 |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-11-15-20-1 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content) | Clinton Edmiston | CT HQ - Hot Mix Asphalt Laboratory | 11/15/2019 | Clinton Edmiston | Yes | 11/17/2019 | | |
2019-11-15-20-2 | AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content) | Clinton Edmiston | CT HQ - Hot Mix Asphalt Laboratory | 11/15/2019 | Clinton Edmiston | Yes | 11/17/2019 | | |
2019-11-15-20-3 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Clinton Edmiston | CT HQ - Hot Mix Asphalt Laboratory | 11/15/2019 | Clinton Edmiston | Yes | 11/17/2019 | | |
2019-11-15-20-4 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Clinton Edmiston | CT HQ - Hot Mix Asphalt Laboratory | 11/15/2019 | Clinton Edmiston | Yes | 11/17/2019 | | |
2019-11-15-20-5 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Clinton Edmiston | CT HQ - Hot Mix Asphalt Laboratory | 11/15/2019 | Clinton Edmiston | Yes | 11/17/2019 | | |
2019-11-15-20-6 | AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content) | Clinton Edmiston | CT HQ - Hot Mix Asphalt Laboratory | 11/15/2019 | Clinton Edmiston | Yes | 11/17/2019 | | |
2019-11-15-20-7 | AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track) | Clinton Edmiston | CT HQ - Hot Mix Asphalt Laboratory | 11/15/2019 | Clinton Edmiston | Yes | 11/17/2019 | | |
71939719407194171942719437194471945