Owner Lab
- CT QASI - Los Angeles Field Laboratory
DIME Sample ID 2019-11-12-1
Sample is locked from editing. info
Project Information
Project Identifiers | DEA: No Project |
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 11/12/2019 |
Sample Unique Key | 1 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 11/15/2019 |
Sample type | Verification |
A brief description of the sample | 2.50" ASTM A563-DH Hex Nuts |
The quantity of what the sample constitutes | 5 |
From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Brian |
Last name of sampler or witnessed by | Murray |
Title of sampler | QA Inspector |
Telephone number of sampler | 213 435 4055 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Universal Industrial Sales |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L140-059-19 |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | 188907 |
Nut Mfg. Lot Number(s) | DEAM |
Washer Mfg. Lot Number(s) | |
Bolt Specification | n/a |
Bolt Length(s) | |
Nut Specification | ASTM A563-DH |
Washer Specification | n/a |
Finish | Plain |
Diameter/Size | 2.50" |
Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-11-12-1-1 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/20/2019 | Steven Paine | Yes | 11/21/2019 | | |
2019-11-12-1-2 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/20/2019 | Steven Paine | Yes | 11/21/2019 | | |
2019-11-12-1-3 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/20/2019 | Steven Paine | Yes | 11/21/2019 | | |
2019-11-12-1-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/20/2019 | Steven Paine | Yes | 11/21/2019 | | |
2019-11-12-1-5 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/20/2019 | Steven Paine | Yes | 11/21/2019 | | |
2019-11-12-1-6 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/20/2019 | Steven Paine | Yes | 11/21/2019 | | |
2019-11-12-1-7 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/20/2019 | Steven Paine | Yes | 11/21/2019 | | |
2019-11-12-1-8 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/20/2019 | Steven Paine | Yes | 11/21/2019 | | |
7227672277722787227972280722817228272283