Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2019-10-29-33
Sample is locked from editing. info
Project Information
Project Identifiers | DEA: No Project |
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | 11/01/2022 |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 10/29/2019 |
Sample Unique Key | 33 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 11/06/2019 |
Sample type | Stock |
A brief description of the sample | 1-1/4" x 42" Anchor Bolt |
The quantity of what the sample constitutes | 1 |
From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Rommoney |
Last name of sampler or witnessed by | Wu |
Title of sampler | AMR |
Telephone number of sampler | 9164257894 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | AM Nut and Bolt |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | 3085164 |
Nut Mfg. Lot Number(s) | 30569-75072703 |
Washer Mfg. Lot Number(s) | 317641 |
Bolt Specification | F1554 |
Bolt Length(s) | 42" |
Nut Specification | A194 |
Washer Specification | F436 |
Finish | HDG |
Diameter/Size | 1-1/4" x 42" |
Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-10-29-33-2 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | randelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | randelin | Yes | 11/12/2019 | | |
2019-10-29-33-4 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | randelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | randelin | Yes | 11/12/2019 | | |
2019-10-29-33-5 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | randelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | randelin | Yes | 11/12/2019 | | |
2019-10-29-33-6 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Rheanna Andelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | Rheanna Andelin | Yes | 11/12/2019 | | |
2019-10-29-33-7 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Rheanna Andelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | Rheanna Andelin | Yes | 11/12/2019 | | |
2019-10-29-33-8 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Rheanna Andelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | Rheanna Andelin | Yes | 11/12/2019 | | |
2019-10-29-33-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Rheanna Andelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | Rheanna Andelin | Yes | 11/12/2019 | | |
2019-10-29-33-10 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Rheanna Andelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | Rheanna Andelin | Yes | 11/12/2019 | | |
2019-10-29-33-11 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Rheanna Andelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | Rheanna Andelin | Yes | 11/12/2019 | | |
2019-10-29-33-12 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Rheanna Andelin | CT HQ - Sacramento Structural Materials Testing Laboratory | 11/07/2019 | Rheanna Andelin | Yes | 11/12/2019 | | |
71501715237153671565715667156771568715697157071571
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
No results found. |
Test File Attachments
DIME Test ID: 2019-10-29-33-2 ASTM A370-15 (Verified)
DIME Test ID: 2019-10-29-33-4 ASTM F606-14a (Verified)
DIME Test ID: 2019-10-29-33-5 ASTM A370-15 (Verified)
DIME Test ID: 2019-10-29-33-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-29-33-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-29-33-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-29-33-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-29-33-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-29-33-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-29-33-12 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-29-33-13 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-29-33-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-29-33-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-29-33-16 ASTM E18-15 (Verified)
DIME Test ID: 2019-10-29-33-17 ASTM E18-15 (Verified)