Sample Record

Owner Lab

  • CT HQ - QASI Los Angeles Field Office

DIME Sample ID 2019-10-02-10

Sample is locked from editing. info

Project Information

Project Identifiers
DEA: No Project
DIST-CO-RTE-PM---
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date10/02/2019 Sample Unique Key10
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/04/2019
Sample typeQuality Assurance A brief description of the sample1-1/2"-6 x 42" DES
The quantity of what the sample constitutes277 From where was the sample collectedFabricator
First name of sampler or witnessed bySteve Last name of sampler or witnessed byHall
Title of samplerCT METS QA INSPECTOR Telephone number of sampler6466327821
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameA and M Nut and Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormL134-106-19 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)5803734806 Nut Mfg. Lot Number(s)DEBH
Washer Mfg. Lot Number(s)314551 Bolt SpecificationASTM F1554-15 Gr 55-S1
Bolt Length(s)42" Nut SpecificationASTM A194-14a Gr 2h
Washer SpecificationASTM F436 FinishHDG
Diameter/Size1.5" Bolt Mfg. Lot Number47561-PPO
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-10-02-10-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)randelin, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019randelin
Yes
10/16/2019nut proof load
2019-10-02-10-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)randelin, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019randelin
Yes
10/16/2019nut proof load
2019-10-02-10-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)randelin, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019randelin
Yes
10/16/2019nut proof load
2019-10-02-10-4ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019fsaylor
Yes
10/16/2019
2019-10-02-10-5ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019fsaylor
Yes
10/16/2019
2019-10-02-10-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Rheanna Andelin, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019Rheanna Andelin
Yes
10/16/2019
2019-10-02-10-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Rheanna Andelin, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019Rheanna Andelin
Yes
10/16/2019
2019-10-02-10-8ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Rheanna Andelin, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019Rheanna Andelin
Yes
10/16/2019
2019-10-02-10-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Rheanna Andelin, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019Rheanna Andelin
Yes
10/16/2019
2019-10-02-10-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Rheanna Andelin, CT HQ - Sacramento Structural Materials Testing Laboratory10/14/2019Rheanna Andelin
Yes
10/16/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-10-02-10-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-10-02-10-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-10-02-10-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-10-02-10-4 ASTM A370-15 (Verified)
DIME Test ID: 2019-10-02-10-5 ASTM A370-15 (Verified)
DIME Test ID: 2019-10-02-10-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-02-10-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-02-10-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-02-10-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-02-10-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-02-10-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-02-10-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-02-10-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-10-02-10-14 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-15 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-16 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-17 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-18 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-19 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-20 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-21 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-22 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-23 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-24 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-25 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-26 ASTM B499-14 (Verified)
DIME Test ID: 2019-10-02-10-27 ASTM E18-15 (Verified)
DIME Test ID: 2019-10-02-10-28 ASTM E18-15 (Verified)
DIME Test ID: 2019-10-02-10-29 ASTM E18-15 (Verified)