Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2019-08-30-12
Sample is locked from editing. info
Project Information
Project Identifiers | DEA: No Project |
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | 11/01/2022 |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 08/30/2019 |
Sample Unique Key | 12 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 09/11/2019 |
Sample type | Quality Assurance |
A brief description of the sample | A325 Bolts |
The quantity of what the sample constitutes | 10 |
From where was the sample collected | Source |
First name of sampler or witnessed by | Jason |
Last name of sampler or witnessed by | Williams |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Ameron International |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | |
Nut Mfg. Lot Number(s) | |
Washer Mfg. Lot Number(s) | NA |
Bolt Specification | F3125 A325 |
Bolt Length(s) | 3.5", 4" |
Nut Specification | NA |
Washer Specification | NA |
Finish | F2329 |
Diameter/Size | 1.5" |
Bolt Mfg. Lot Number | 56102-1, 56102-2 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-08-30-12-1 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-2 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
2019-08-30-12-10 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 09/19/2019 | Fred Saylor | Yes | 09/19/2019 | | |
68365683666836768368683696837068371683726837368374
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
No results found. |
Test File Attachments
DIME Test ID: 2019-08-30-12-1 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-30-12-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-30-12-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-30-12-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-30-12-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-30-12-6 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-30-12-7 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-30-12-8 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-30-12-9 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-30-12-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-30-12-11 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-30-12-12 ASTM E18-15 (Verified)
DIME Test ID: 2019-08-30-12-13 ASTM E18-15 (Verified)