Owner Lab
- CT - Southern Regional Laboratory
DIME Sample ID 2019-06-28-3
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 213749 DEA: 120C1104 EFIS: 1200000633 |
DIST-CO-RTE-PM | 12-ORA-57-20.3/21.6 |
Award Date | 04/19/2019 |
Closeout Date | Not set |
Work Description | WIDEN BRIDGES AND CONSTRUCT RW, SW, HMA, JPCP AND ELECTRICAL SYSTEMS. |
Location Description | ORANGE COUNTY IN BREA FROM 0.6 MILE SOUTH TO 0.7 MILE NORTH OF LAMBERT ROAD UNDERCROSSING |
QA Service Level | 1 (Verified on 05/31/2019) |
Sample Information
Sample Taken Date | 06/28/2019 |
Sample Unique Key | 3 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 06/28/2019 |
Sample type | Verification |
A brief description of the sample | 3/4 HMA-A-SP R15 |
The quantity of what the sample constitutes | JMF 8 bags |
From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Vulcan Corona |
Last name of sampler or witnessed by | QC |
Title of sampler | |
Telephone number of sampler | |
Laboratory sample identification | 0389A-19 |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Corona, Pacific Clay Products |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | |
Structure unique identifier | |
Structure name | |
---|
Material Information
Material Type | Aggregate |
Source Identification (SMARA or name of Pit) | Vulcan Corona, Pacific Clay Products |
The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R15 |
The fabricator/manufacturer designation for the sample | 220831 CORD SJR |
The plant number | Unknown |
A detailed description of where the material sample was collected | Belt Cut at Plant |
Where the material sample would have been placed if not sampled | Unknown |
Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown |
Lot number | Unknown |
Sublot number | Unknown |
JMF Verification ID | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-06-28-3-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Edmond Jabbour | CT - Southern Regional Laboratory | 07/03/2019 | Michael Magana | Yes | 08/22/2019 | | |
2019-06-28-3-2 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 07/09/2019 | Michael Magana | Yes | 08/22/2019 | | |
2019-06-28-3-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz | CT - Southern Regional Laboratory | 07/07/2019 | Michael Magana | Yes | 08/22/2019 | | |
2019-06-28-3-4 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu | CT - Southern Regional Laboratory | 07/07/2019 | Michael Magana | Yes | 08/22/2019 | | |
2019-06-28-3-5 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Husni Ankir | CT - Southern Regional Laboratory | 07/05/2019 | Michael Magana | Yes | 08/22/2019 | | |
2019-06-28-3-6 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Larry Diaz | CT - Southern Regional Laboratory | 07/05/2019 | Michael Magana | Yes | 08/22/2019 | | |
2019-06-28-3-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain | CT - Southern Regional Laboratory | 07/09/2019 | Michael Magana | Yes | 08/22/2019 | | |
2019-06-28-3-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain | CT - Southern Regional Laboratory | 07/09/2019 | Michael Magana | Yes | 08/22/2019 | | |
2019-06-28-3-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 07/05/2019 | Michael Magana | Yes | 08/22/2019 | RAP Gradation After Ignition Oven | |
2019-06-28-3-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Larry Diaz | CT - Southern Regional Laboratory | 07/05/2019 | Michael Magana | Yes | 08/22/2019 | Combined Virgin Aggregate/RAP Gradation w/Correlation Factors Applied | |
63925639266392763928639296393063931639326393363934