Sample Record

Owner Lab

  • CT D01 - Eureka Northern Regional Laboratory

DIME Sample ID 2019-05-31-11

Sample is locked from editing. info

Project Information

Project Identifiers
DEA: No Project
DIST-CO-RTE-PM---
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date05/31/2019 Sample Unique Key11
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/31/2019
Sample typeVerification A brief description of the sample1/2" HMA
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byMark Last name of sampler or witnessed byAttarian
Title of samplerTE Telephone number of sampler
Laboratory sample identification19-076 Linked DIME Sample ID
The fabricator/manufacturer/facility nameKernen Transportation Laboratory (TL) Number908925
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot numberUnknown
Sublot numberUnknown HMA Mix NumberNot set

JMF Information

Verification IDJMF3513-2019-66 Date Created06/11/2019
JMF Submittal IDJMF3511-21-2019-99 JMF StatusSubmittal Accepted for Verification
Producer Mix ID18-1029.13 Authorized DateN/A

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2019-05-31-11-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)Leif AyresCT D01 - Eureka Northern Regional Laboratory06/12/2019Leif Ayres
Yes
06/12/2019average of 2 tests 6.3, 6.26
2019-05-31-11-2AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content)Leif AyresCT D01 - Eureka Northern Regional Laboratory06/12/2019Leif Ayres
Yes
06/12/2019
2019-05-31-11-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Leif AyresCT D01 - Eureka Northern Regional Laboratory06/12/2019Leif Ayres
Yes
06/12/2019
2019-05-31-11-4AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Leif AyresCT D01 - Eureka Northern Regional Laboratory06/12/2019Leif Ayres
Yes
06/12/2019
2019-05-31-11-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Leif AyresCT D01 - Eureka Northern Regional Laboratory06/12/2019Leif Ayres
Yes
06/12/2019
2019-05-31-11-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Leif AyresCT D01 - Eureka Northern Regional Laboratory06/12/2019Leif Ayres
Yes
06/12/20191/2 in rut depth at 13500 and 13100. Inflection point at 8646 and 8634
2019-05-31-11-7AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Leif AyresCT D01 - Eureka Northern Regional Laboratory06/12/2019Leif Ayres
Yes
06/12/2019

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-05-31-11-1 AASHTO T308-10 (Verified)
DIME Test ID: 2019-05-31-11-2 AASHTO T329-13 (Verified)
DIME Test ID: 2019-05-31-11-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2019-05-31-11-4 AASHTO T209-12 (Verified)
DIME Test ID: 2019-05-31-11-5 AASHTO T269-14 (Verified)
DIME Test ID: 2019-05-31-11-6 AASHTO T324-14 (Verified)
DIME Test ID: 2019-05-31-11-7 AASHTO T283-14 (Verified)