Owner Lab
- CT HQ - QASI Bay Area Field Office
DIME Sample ID 2019-04-22-1
Sample is locked from editing. info
Project Information
Project Identifiers | DEA: No Project |
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | 11/01/2022 |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 04/22/2019 |
Sample Unique Key | 1 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 04/24/2019 |
Sample type | Verification |
A brief description of the sample | 2 1/2 x 5'-0" anchor bolt |
The quantity of what the sample constitutes | 5 |
From where was the sample collected | Fabricator |
First name of sampler or witnessed by | David |
Last name of sampler or witnessed by | Flygare |
Title of sampler | CA METS QA Inspector |
Telephone number of sampler | 8016692984 |
Laboratory sample identification | |
Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | UIS |
Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | B76-055-19 |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | none |
Heat Number(s) | 1201006811 |
Nut Mfg. Lot Number(s) | n/a |
Washer Mfg. Lot Number(s) | n/a |
Bolt Specification | F1554 Gr. 55 |
Bolt Length(s) | 5'-0" |
Nut Specification | n/a |
Washer Specification | n/a |
Finish | HDG/plain |
Diameter/Size | 2 1/2" x 5'-0" |
Bolt Mfg. Lot Number | UIS 120100681120 |
Rocap Test Requirement(s) | none |
Lubricant Requirements(s) | none |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-04-22-1-1 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Steve | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steve | Yes | 05/10/2019 | | |
2019-04-22-1-2 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Steve | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steve | Yes | 05/10/2019 | | |
2019-04-22-1-3 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steven Paine | Yes | 05/10/2019 | | |
2019-04-22-1-4 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steven Paine | Yes | 05/10/2019 | | |
2019-04-22-1-5 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steven Paine | Yes | 05/10/2019 | | |
2019-04-22-1-6 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steven Paine | Yes | 05/10/2019 | | |
2019-04-22-1-7 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steven Paine | Yes | 05/10/2019 | | |
2019-04-22-1-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steven Paine | Yes | 05/10/2019 | | |
2019-04-22-1-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steven Paine | Yes | 05/10/2019 | | |
2019-04-22-1-10 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/02/2019 | Steven Paine | Yes | 05/10/2019 | | |
59214592155925659257592585925959260592615926259263
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
No results found. |
Test File Attachments
DIME Test ID: 2019-04-22-1-1 ASTM A370-15 (Verified)
DIME Test ID: 2019-04-22-1-2 ASTM A370-15 (Verified)
DIME Test ID: 2019-04-22-1-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-22-1-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-22-1-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-22-1-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-22-1-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-04-22-1-8 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-22-1-9 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-22-1-10 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-22-1-11 ASTM B499-14 (Verified)
DIME Test ID: 2019-04-22-1-12 ASTM B499-14 (Verified)