Owner Lab
- CT HQ - Sacramento Cement Testing Laboratory
DIME Sample ID 2019-01-09-2
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 8801 DEA: AML-CEM EFIS: AML-CEM |
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for Cementitious Materials for use in Concrete Authorized Material List (AML) |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 01/09/2019 |
Sample Unique Key | 2 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 01/09/2019 |
Sample type | Annual Source Testing |
A brief description of the sample | Slag Cement NewCem |
The quantity of what the sample constitutes | 1 Bucket |
From where was the sample collected | Source |
First name of sampler or witnessed by | Unknown |
Last name of sampler or witnessed by | Unknown |
Title of sampler | Unknown |
Telephone number of sampler | Unknown |
Laboratory sample identification | CM195905 |
Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | LaFarge |
Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | Cementitious |
Brand | LaFarge |
Mill | Seattle |
Type of Cementitious Material | Slag Cement |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2019-01-09-2-2 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | SA | CT HQ - Sacramento Cement Testing Laboratory | 05/16/2019 | | Yes | 01/22/2021 | 7 Day Break. Should have thrown out third cube making average 2970 psi and Strength Activity Index 65%. | |
2019-01-09-2-3 | ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) | SA | CT HQ - Sacramento Cement Testing Laboratory | 06/06/2019 | | Yes | 01/22/2021 | 28 Day Break. Should have thrown out third cube making average 5180 psi and Strength Activity Index 96%. | |
2019-01-09-2-4 | ASTM C185-15a: Standard Test Method for Air Content of Hydraulic Cement Mortar | Stephen Donnelly | CT HQ - Sacramento Cement Testing Laboratory | 05/15/2019 | Stephen Donnelly | Yes | 01/22/2021 | | |
2019-01-09-2-5 | ASTM C188-15: Standard Test Method for Density of Hydraulic Cement | Stephen Donnelly | CT HQ - Sacramento Cement Testing Laboratory | 06/25/2019 | Stephen Donnelly | Yes | 01/22/2021 | | |
2019-01-09-2-6 | ASTM C204-11: Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus | Stephen Donnelly | CT HQ - Sacramento Cement Testing Laboratory | 06/25/2019 | Stephen Donnelly | Yes | 01/22/2021 | | |
2019-01-09-2-8 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Spencer Adams | CT HQ - Sacramento Cement Testing Laboratory | 07/02/2019 | Spencer Adams | Yes | 01/22/2021 | 7 day test | |
2019-01-09-2-9 | ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) | Spencer Adams | CT HQ - Sacramento Cement Testing Laboratory | 07/23/2019 | Spencer Adams | Yes | 01/22/2021 | 28 day test | |
2019-01-09-2-10 | ASTM C430-8: Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve | SD | CT HQ - Sacramento Cement Testing Laboratory | 03/14/2019 | Benjamin Lenz | Yes | 01/22/2021 | | |
60063614666271262711623626314384035102396