Owner Lab
- CT QASI - Bay Area Field Laboratory
DIME Sample ID 2018-12-21-1
Sample is locked from editing. info
Project Information
| Project Identifiers |
DEA: No Project |
|---|
| DIST-CO-RTE-PM | --- |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Special project identifier for material not associated with a project |
|---|
| Location Description | Not set |
|---|
| QA Service Level | NOT VERIFIED |
|---|
Sample Information
| Sample Taken Date | 12/21/2018 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 12/26/2018 |
|---|
| Sample type | Verification |
A brief description of the sample | 2", 2 1/4', 2 1/2" A563-DH HDG and plain nuts |
|---|
| The quantity of what the sample constitutes | 3 and 5 ea |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | David |
Last name of sampler or witnessed by | Flygare |
|---|
| Title of sampler | CA METS QA Inspector |
Telephone number of sampler | 801-669-2984 |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | UIS |
Transportation Laboratory (TL) Number | Unknown |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B76-256-18 |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | n/a |
|---|
| Heat Number(s) | 188527, 177682, 188194, 188739, 188360, 156042, 188360, 188451 |
Nut Mfg. Lot Number(s) | Dyson- DDZP, DDYC, DDYO, DEAC, DDZA, DDTN, DDZD, DDZR |
|---|
| Washer Mfg. Lot Number(s) | n/a |
Bolt Specification | n/a |
|---|
| Bolt Length(s) | n/a |
Nut Specification | A563-DH |
|---|
| Washer Specification | n/a |
Finish | HDG and plain |
|---|
| Diameter/Size | 2", 2 1/4", 2 1/2" |
Bolt Mfg. Lot Number | n/a |
|---|
| Rocap Test Requirement(s) | none |
Lubricant Requirements(s) | yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2018-12-21-1-1 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-2 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-3 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-5 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-6 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-7 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-8 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
| 2018-12-21-1-10 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2019 | Steven Paine | Yes | 01/15/2019 | |
|
54333543345433554336543375433854339543405434154342
