Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2018-05-18-7

Sample is locked from editing. info

Project Information

Project Identifiers
DEA: No Project
DIST-CO-RTE-PM---
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date05/18/2018 Sample Unique Key7
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/23/2018
Sample typeQuality Assurance A brief description of the sampleassorted sizes of Fastener assembles
The quantity of what the sample constitutes150 181 48 59 From where was the sample collectedFabricator
First name of sampler or witnessed byStuart Last name of sampler or witnessed byRoss
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameAM Nut and Bolt Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormB356-010-18 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)3066884, 3075021, 5803303205, 5802947605, 75067329, DL17103953, 3074441, DL17101378, 31712140, 276189, 277527, 278507 Nut Mfg. Lot Number(s)26581-7506732, 399602B, W3059, 393694A
Washer Mfg. Lot Number(s)292005, 2184069, 2204739, 292631 Bolt SpecificationF1554-07
Bolt Length(s)12", 42", 40" Nut SpecificationA194
Washer SpecificationF436, A568-15 FinishHDG
Diameter/Size5/8", 1-1/4", 2-1/4", 1" Bolt Mfg. Lot Number42024-PPO, 42366-PPO, 100341506-PPO, 42410-PP
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-05-18-7-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018Nut Proof Load
2018-05-18-7-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018Nut Proof Load
2018-05-18-7-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018Nut Proof
2018-05-18-7-4ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018F1554 Gr 55 Rod
2018-05-18-7-5ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018F 1554 Gr 55 Rod
2018-05-18-7-6ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018
2018-05-18-7-7ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018
2018-05-18-7-8ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018
2018-05-18-7-9ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018
2018-05-18-7-10ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)BrianCT HQ - Sacramento Structural Materials Testing Laboratory05/29/2018Brian
Yes
06/06/2018

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2018-05-18-7-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-18-7-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-18-7-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-18-7-4 ASTM F606-14 (Verified)
DIME Test ID: 2018-05-18-7-5 ASTM F606-14 (Verified)
DIME Test ID: 2018-05-18-7-6 ASTM A370-15 (Verified)
DIME Test ID: 2018-05-18-7-7 ASTM A370-15 (Verified)
DIME Test ID: 2018-05-18-7-8 ASTM A370-15 (Verified)
DIME Test ID: 2018-05-18-7-9 ASTM A370-15 (Verified)
DIME Test ID: 2018-05-18-7-10 ASTM A370-15 (Verified)
DIME Test ID: 2018-05-18-7-11 ASTM A370-15 (Verified)
DIME Test ID: 2018-05-18-7-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-26 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-27 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-28 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-29 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-30 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-31 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-32 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-33 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-34 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-35 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-36 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-18-7-37 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-38 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-39 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-40 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-41 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-42 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-43 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-44 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-45 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-46 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-47 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-48 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-49 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-50 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-51 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-52 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-53 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-54 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-55 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-56 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-57 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-58 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-59 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-60 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-61 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-62 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-63 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-64 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-65 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-66 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-67 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-68 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-69 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-70 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-71 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-72 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-73 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-74 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-75 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-18-7-76 ASTM B499-14 (Verified)