Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2018-05-16-10
Sample is locked from editing. info
Project Information
Project Identifiers | DEA: No Project |
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 05/16/2018 |
Sample Unique Key | 10 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/22/2018 |
Sample type | Quality Assurance |
A brief description of the sample | 1 1/4 -7 X 3 1/4 HDG Hex bolt |
The quantity of what the sample constitutes | 5 |
From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Phil |
Last name of sampler or witnessed by | Mahon |
Title of sampler | QA |
Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | JLK Industries |
Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | 100791258 |
Nut Mfg. Lot Number(s) | |
Washer Mfg. Lot Number(s) | |
Bolt Specification | F3125 |
Bolt Length(s) | 3 1/4 |
Nut Specification | N/A |
Washer Specification | N/A |
Finish | HDG |
Diameter/Size | 1 1/4 |
Bolt Mfg. Lot Number | 405573A |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2018-05-16-10-1 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-2 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
2018-05-16-10-10 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/24/2018 | Fred Saylor | Yes | 06/01/2018 | | |
44739447404474144742447434474444745447464474744748