DIME - Sample Record for DIME Sample ID 2018-05-14-1

DIME » All Projects » Project - DEA: No Project » Sample 2018-05-14-1 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2018-05-14-1

Sample is locked from editing. info

Project Information

Project Identifiers	DEA: No Project
DIST-CO-RTE-PM	---
Award Date	Not set
Closeout Date	11/01/2022
Work Description	Special project identifier for material not associated with a project
Location Description	Not set
QA Service Level	NOT VERIFIED

Sample Information

Sample Taken Date	05/14/2018	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/18/2018
Sample type	Verification	A brief description of the sample	A325 HDG bolt assemblies
The quantity of what the sample constitutes	12 and 8	From where was the sample collected	Fabricator
First name of sampler or witnessed by	David	Last name of sampler or witnessed by	Flygare
Title of sampler	CA METS QA Inspector	Telephone number of sampler	801-669-2984
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	UIS	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	B76-095-18	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	TT0101214, TT0101215
Heat Number(s)	DL16101278,10502520,31721830, 100788102, 177972, 279846	Nut Mfg. Lot Number(s)	Decker-18-04-001, Unytite-27439-177972
Washer Mfg. Lot Number(s)	Prestige-D4459, Wrought-308244	Bolt Specification	A325 HDG
Bolt Length(s)	4" and 5 1/2"	Nut Specification	A563-DH
Washer Specification	F436 HDG	Finish	HDG
Diameter/Size	1/2" x 4", 3/4" x 5 1/2"	Bolt Mfg. Lot Number	Nucor-G9122, SLSB-BG1014
Rocap Test Requirement(s)	yes	Lubricant Requirements(s)	wax and dye

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2018-05-14-1-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred	Yes	06/01/2018	A325
2018-05-14-1-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred	Yes	06/01/2018	A325
2018-05-14-1-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred	Yes	06/01/2018	A325
2018-05-14-1-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred	Yes	06/01/2018	Nut Proof Load
2018-05-14-1-5	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred	Yes	06/01/2018	Nut Proof Load
2018-05-14-1-6	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred	Yes	06/01/2018	Nut Proof Load
2018-05-14-1-7	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred Saylor	Yes	06/01/2018
2018-05-14-1-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred Saylor	Yes	06/01/2018
2018-05-14-1-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred Saylor	Yes	06/01/2018
2018-05-14-1-10	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	05/24/2018	Fred Saylor	Yes	06/01/2018

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-05-14-1-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-14-1-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-14-1-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-14-1-4 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-14-1-5 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-14-1-6 ASTM F606-14a (Verified)
DIME Test ID: 2018-05-14-1-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-18 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-19 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-20 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-21 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-22 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-23 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-24 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-25 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-26 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-27 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-28 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-29 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-30 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-31 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-32 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-33 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-05-14-1-34 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-35 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-36 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-37 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-38 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-39 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-40 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-41 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-42 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-43 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-44 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-45 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-46 ASTM B499-14 (Verified)
DIME Test ID: 2018-05-14-1-47 ASTM E18-15 (Verified)
DIME Test ID: 2018-05-14-1-48 ASTM E18-15 (Verified)
DIME Test ID: 2018-05-14-1-49 ASTM E18-15 (Verified)
DIME Test ID: 2018-05-14-1-50 ASTM E18-15 (Verified)
DIME Test ID: 2018-05-14-1-51 ASTM E18-15 (Verified)