DIME - Sample Record for DIME Sample ID 2018-04-27-4

DIME » All Projects » Project - DEA: No Project » Sample 2018-04-27-4 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2018-04-27-4

Sample is locked from editing. info

Project Information

Project Identifiers	DEA: No Project
DIST-CO-RTE-PM	---
Award Date	Not set
Closeout Date	11/01/2022
Work Description	Special project identifier for material not associated with a project
Location Description	Not set
QA Service Level	NOT VERIFIED

Sample Information

Sample Taken Date	04/27/2018	Sample Unique Key	4
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/30/2018
Sample type	Quality Assurance	A brief description of the sample	F1554 Grade 55 HDG Anchor Bolts
The quantity of what the sample constitutes	1 lot	From where was the sample collected	Source
First name of sampler or witnessed by	Greg	Last name of sampler or witnessed by	Johnston
Title of sampler	QA	Telephone number of sampler	9165247768
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Blue Circle	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	L53-029-18	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	N/A
Heat Number(s)	PL171102224 428917, 75069862, 177972	Nut Mfg. Lot Number(s)	27609-75069862, 27534-177972
Washer Mfg. Lot Number(s)		Bolt Specification	F1554
Bolt Length(s)	42", 18"	Nut Specification	A563
Washer Specification	F436	Finish	HDG
Diameter/Size	1 1/2x42, 5/8x18, 3/4, 1	Bolt Mfg. Lot Number	PL1710222401
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2018-04-27-4-1	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018	F1554 Gr 55 Rod
2018-04-27-4-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018	Nut Proof
2018-04-27-4-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018	Nut Proof
2018-04-27-4-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018	Nut Proof
2018-04-27-4-5	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018	Nut Proof Load
2018-04-27-4-6	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018	Nut Proof Load
2018-04-27-4-7	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018	Nut Proof Load
2018-04-27-4-8	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018
2018-04-27-4-9	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018
2018-04-27-4-10	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	05/03/2018	Brian	Yes	05/15/2018

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-04-27-4-1 ASTM F606-14 (Verified)
DIME Test ID: 2018-04-27-4-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-27-4-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-27-4-4 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-27-4-5 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-27-4-6 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-27-4-7 ASTM F606-14a (Verified)
DIME Test ID: 2018-04-27-4-8 ASTM A370-15 (Verified)
DIME Test ID: 2018-04-27-4-9 ASTM A370-15 (Verified)
DIME Test ID: 2018-04-27-4-10 ASTM A370-15 (Verified)
DIME Test ID: 2018-04-27-4-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-26 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-27 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-28 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-29 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-30 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-04-27-4-31 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-32 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-33 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-34 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-35 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-36 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-37 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-38 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-39 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-40 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-41 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-42 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-43 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-44 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-45 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-46 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-47 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-48 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-49 ASTM B499-14 (Verified)
DIME Test ID: 2018-04-27-4-50 ASTM B499-14 (Verified)