DIME » All Projects » Project - DEA: No Project » Sample 2017-04-20-20 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2017-04-20-20

Sample is locked from editing. info

Project Information

Project Identifiers
DEA: No Project
DIST-CO-RTE-PM---
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date04/20/2017 Sample Unique Key20
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/20/2017
Sample typeQuality Control A brief description of the sampleCombined 1/2-inch Type A Untreated Aggregate
The quantity of what the sample constitutesMix Design From where was the sample collectedOther
First name of sampler or witnessed byPEI Last name of sampler or witnessed byPEI
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameShasta Ranch Aggregates Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedStockpile
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberUnknown Lot numberNot set
Sublot numberNot set Aggregate Mix NumberNot set
HMA PayNo

JMF Information

HMA Design IDJMF3512-2018-37-L170860 Date Created04/16/2018
SubmittalJMF3511-22-2018-26 Submittal In Progress| JMF3513-2018-25
JMF3511-22-2018-28 Submittal In Progress| JMF3513-2018-27
JMF3511-22-2018-30 Submittal Accepted for Verification| JMF3513-2018-29
JMF3511-22-2018-34 Submittal Accepted for Verification| JMF3513-2018-33

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-04-20-20-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta.
2017-04-20-20-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta. Grading designation is speculative.
2017-04-20-20-3AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta.
2017-04-20-20-4AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta.
2017-04-20-20-5ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta.
2017-04-20-20-6CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta. Actual LL and PL values unknown.
2017-04-20-20-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta.
2017-04-20-20-8AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta.
2017-04-20-20-9AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta. Individual loss values unknown.
2017-04-20-20-10AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)PEI, CT D02 - Redding Northern Regional Laboratory04/20/2017Ward Jenkins
Yes
03/21/2018Data input by Ward Jenkins for PEI during beta.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-04-20-20-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2017-04-20-20-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2017-04-20-20-3 AASHTO T176-08 (Verified)
DIME Test ID: 2017-04-20-20-4 AASHTO T304-11 (Verified)
DIME Test ID: 2017-04-20-20-5 ASTM D4791-10 (Verified)
DIME Test ID: 2017-04-20-20-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2017-04-20-20-7 AASHTO T85-13 (Verified)
DIME Test ID: 2017-04-20-20-8 AASHTO T84-14 (Verified)
DIME Test ID: 2017-04-20-20-9 AASHTO T104-99r16 (Verified)
DIME Test ID: 2017-04-20-20-10 AASHTO T210-15 (Verified)