DIME - Sample Record for DIME Sample ID 2017-06-19-1

DIME » All Projects » Project - DEA: 11409304 » Sample 2017-06-19-1 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-06-19-1

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 210549 DEA: 11409304 EFIS: 1112000070
DIST-CO-RTE-PM	11-SD-75,15,163-R21.0/R21.6
Award Date	09/01/2015
Closeout Date	07/05/2019
Work Description	CLEAN AND PAINT THE CORONADO BRIDGE AND BUILD TRAVELER SYSTEMS.
Location Description	SAN DIEGO COUNTY IN SAN DIEGO FROM 0.9 NORTH TO 1.5 MILES NORTH OF GLORIETTA BOULEVARD
QA Service Level	1 (Verified on 09/22/2015)

Sample Information

Sample Taken Date	06/19/2017	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/21/2017
Sample type	Quality Assurance	A brief description of the sample	A325 HDG Rocap Assembiy
The quantity of what the sample constitutes	127	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Kevin	Last name of sampler or witnessed by	Churchill
Title of sampler	QA Inspector	Telephone number of sampler	510-693-3545
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Cordova Bolt	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	304-17-01
Heat Number(s)	306653 Bolt, DL16101605 Nut, 164315 Washer	Nut Mfg. Lot Number(s)	375883B
Washer Mfg. Lot Number(s)	0816-341	Bolt Specification	A325
Bolt Length(s)	11"	Nut Specification	A563 DH
Washer Specification	F436	Finish	Hot Dipped Galvanized
Diameter/Size	1"	Bolt Mfg. Lot Number	Q5327A
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2017-06-19-1-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Brian	Yes	06/30/2017	A325
2017-06-19-1-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Brian	Yes	06/30/2017	Nut Proof
2017-06-19-1-3	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Fred Saylor	Yes	06/30/2017
2017-06-19-1-4	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Fred Saylor	Yes	06/30/2017
2017-06-19-1-5	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Fred Saylor	Yes	06/30/2017
2017-06-19-1-6	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Fred Saylor	Yes	06/30/2017
2017-06-19-1-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Fred Saylor	Yes	06/30/2017
2017-06-19-1-8	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Fred Saylor	Yes	06/30/2017
2017-06-19-1-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Fred Saylor	Yes	06/30/2017
2017-06-19-1-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	06/23/2017	Fred Saylor	Yes	06/30/2017

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-06-19-1-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-06-19-1-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-06-19-1-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-19-1-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-19-1-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-06-19-1-6 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-7 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-8 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-06-19-1-15 ASTM E18-15 (Verified)
DIME Test ID: 2017-06-19-1-16 ASTM E18-15 (Verified)