Owner Lab
- CT QASI - Bay Area Field Laboratory
DIME Sample ID 2017-05-25-1
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 211855
DEA: 081E6504
EFIS: 0814000059 |
|---|
| DIST-CO-RTE-PM | 08-RIV-60-R0.0/7.5 |
|---|
| Award Date | 12/29/2016 |
|---|
| Closeout Date | 06/23/2021 |
|---|
| Work Description | INSTALL DOUBLE LUMINAIRE LIGHTINGS AND UPGRADE EXISTING LIGHTINGS |
|---|
| Location Description | RIVERSIDE COUNTY FROM SAN BERNARDINO COUNTY LINE TO VALLEY WAY UNDERCROSSING |
|---|
| QA Service Level | 1 (Verified on 04/07/2017) |
|---|
Sample Information
| Sample Taken Date | 05/25/2017 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/25/2017 |
|---|
| Sample type | Verification |
A brief description of the sample | F1554 Grade 55 HDG Anchor Bolts |
|---|
| The quantity of what the sample constitutes | 1 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | David |
Last name of sampler or witnessed by | Flygare |
|---|
| Title of sampler | CT METS QA INSPECTOR |
Telephone number of sampler | 801-669-2984 |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | EDSCO |
Transportation Laboratory (TL) Number | C719138 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B76-049-17 |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | n/a |
|---|
| Heat Number(s) | 3047881 |
Nut Mfg. Lot Number(s) | Ameribolt 56286
Dyson 111099 |
|---|
| Washer Mfg. Lot Number(s) | wrought 266919 |
Bolt Specification | F1554 Gr.55 |
|---|
| Bolt Length(s) | Unknown |
Nut Specification | A194-2H |
|---|
| Washer Specification | F436 |
Finish | HDG/Plain |
|---|
| Diameter/Size | 1 3/4" x 4'-6" |
Bolt Mfg. Lot Number | n/a |
|---|
| Rocap Test Requirement(s) | none |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2017-05-25-1-1 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/01/2017 | Arnold Viken | Yes | 06/09/2017 | |
|
| 2017-05-25-1-2 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/01/2017 | Arnold Viken | Yes | 06/09/2017 | Plain |
|
| 2017-05-25-1-3 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/01/2017 | Arnold Viken | Yes | 06/09/2017 | |
|
| 2017-05-25-1-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/01/2017 | Arnold Viken | Yes | 06/09/2017 | |
|
| 2017-05-25-1-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/01/2017 | Arnold Viken | Yes | 06/09/2017 | |
|
| 2017-05-25-1-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/01/2017 | Arnold Viken | Yes | 06/09/2017 | |
|
| 2017-05-25-1-7 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/01/2017 | Arnold Viken | Yes | 06/09/2017 | |
|
| 2017-05-25-1-8 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Brian | Yes | 06/09/2017 | |
|
| 2017-05-25-1-9 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Brian | Yes | 06/09/2017 | |
|
| 2017-05-25-1-10 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/01/2017 | Arnold Viken | Yes | 06/09/2017 | |
|
27121271252712627227272282722927230272352723727238
