DIME - Sample Record for DIME Sample ID 2023-09-19-8

DIME » All Projects » Project - DEA: 051Q0804 » Sample 2023-09-19-8 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2023-09-19-8

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 994486 DEA: 051Q0804 EFIS: 0522000148
DIST-CO-RTE-PM	05-SCR,SCR/SCR-9,1-17.41/17.5
Award Date	Not set
Closeout Date	Not set
Work Description	Repair of viaduct barrier wall and replace CIDH piles. Holiday Lane Viaduct Slipout. State Route 9 at PM SCR-09-8.4 Jay's Slide, and SR 236 (SCR-236-16.87)
Location Description	Santa Cruz County. State Route 9 at PM SCR-09-8.4 and SR 236 (SCR-236-16.87)
QA Service Level	1 (Verified on 02/13/2023)

Sample Information

Sample Taken Date	09/19/2023	Sample Unique Key	8
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/22/2023
Sample type	Quality Assurance	A brief description of the sample	1-1/4" A563-DH hex Bolt HDG
The quantity of what the sample constitutes	386	From where was the sample collected	Fabricator
First name of sampler or witnessed by	David	Last name of sampler or witnessed by	Lund
Title of sampler	CT METS QA INSPECTOR	Telephone number of sampler	385-452-2398
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Universal Industrial Sales Inc	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	B390-177-23	Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	na
Heat Number(s)	223882	Nut Mfg. Lot Number(s)	37825-223882
Washer Mfg. Lot Number(s)	na	Bolt Specification	na
Bolt Length(s)	na	Nut Specification	A563-DH
Washer Specification	na	Finish	HDG
Diameter/Size	1-1/4"	Bolt Mfg. Lot Number	na
Rocap Test Requirement(s)	na	Lubricant Requirements(s)	Wax Dye
Washer Inner Diameter(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2023-09-19-8-1	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	09/22/2023	09/22/2023	Yes	09/22/2023	Proof Load	Public - Test Data Visible
2023-09-19-8-2	ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	<None>, CT HQ - Sacramento Structural Materials Testing Laboratory	09/22/2023	09/22/2023	Yes	09/22/2023	Proof Load	Public - Test Data Visible
2023-09-19-8-3	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	09/22/2023	09/22/2023	Yes	09/22/2023		Public - Test Data Visible
2023-09-19-8-4	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	09/22/2023	09/22/2023	Yes	09/22/2023		Public - Test Data Visible
2023-09-19-8-5	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	09/22/2023	09/22/2023	Yes	09/22/2023		Public - Test Data Visible
2023-09-19-8-6	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	09/22/2023	09/22/2023	Yes	09/22/2023		Public - Test Data Visible
2023-09-19-8-7	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	09/22/2023	09/22/2023	Yes	09/22/2023		Public - Test Data Visible
2023-09-19-8-8	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	09/22/2023	09/22/2023	Yes	09/22/2023		Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-09-19-8-1 ASTM F606-21 (Verified)
DIME Test ID: 2023-09-19-8-2 ASTM F606-21 (Verified)
DIME Test ID: 2023-09-19-8-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-09-19-8-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2023-09-19-8-5 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-09-19-8-6 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-09-19-8-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2023-09-19-8-8 ASME B1.2-83r17 (Verified)