Summary for Test 2020-09-14-5-1
Test performed: ASTM F606-14Project Information
| Project Identifiers | Project ID: 214228 DEA: 120N4904 EFIS: 1214000050 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-91-R12.5/R13.9 |
| Award Date | 11/29/2022 |
| Closeout Date | 11/07/2023 |
| Work Description | VEHICLE ENFORCEMENT FACILITY IMPROVEMENT AT PERALTA WEIGH STATION. |
| Location Description | ORANGE COUNTY IN ANAHEIM FROM 1.0 MILE EAST OF ROUTE 91/90 SEPARATION TO 0.5 MILE WEST OF WEIR CANYON ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 08/13/2019) |
Sample Information
| Sample Taken Date | 09/14/2020 | Sample Unique Key | 5 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/24/2020 |
| Sample type | Quality Assurance | A brief description of the sample | 5/8" x 20" Hex bolts |
| The quantity of what the sample constitutes | 22 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Steve | Last name of sampler or witnessed by | Hall |
| Title of sampler | CT METS QA INSPECTOR | Telephone number of sampler | 6466327821 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Bristol Machine | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L134-199-20 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 1202017849 | Nut Mfg. Lot Number(s) | N/A |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | A1554 Gr. 36 |
| Bolt Length(s) | 20" | Nut Specification | N/A |
| Washer Specification | N/A | Finish | black |
| Diameter/Size | 5/8" | Bolt Mfg. Lot Number | 120201784960 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-09-14-5
DIME Test ID: 2020-09-14-5-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2020-09-30
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 09/28/2020
UTM: 400kip
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1A | UNC 5/8 | 0.226 | 17182 | 76 | 75998 | 52050 | 11763 | F1154 GR 36 Wedge Tensile |
General comments (publicly viewable) (Max 1000 characters): F1154 GR 36 Wedge Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 9/30/2020 ✔