Summary for Test 2020-03-05-22-1

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 66666
DEA: APP
EFIS: 0019000052
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for submitting Sample information for Aggregate Pre-approval Program (APP). Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date03/05/2020 Sample Unique Key22
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/08/2020
Sample typeAggregate Prequalification Program A brief description of the sample3/8" CA Pea Gravel
The quantity of what the sample constitutesproduction stockpile. From where was the sample collectedManufacturer
First name of sampler or witnessed byKevin Last name of sampler or witnessed byOwen
Title of samplerQuality Control Supervisor Telephone number of sampler209-481-2952
Laboratory sample identification20-APPC-0050 Linked DIME Sample ID2020-3-5-13
The fabricator/manufacturer/facility nameSanta Fe Kaweah South Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-54-0036::KAWEAH SOUTH
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedStockpile at the Plant
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/8 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown HMA Design ID

Test Details

DIME Sample ID: 2020-03-05-22
DIME Test ID: 2020-03-05-22-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-05-13

Test Results


What size aggregate is being tested?: 0.375 in x No. 8 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 04/27/2020
Individual mass retained on the 1/2 in. sieve: 0 grams
Individual mass retained on the 3/8 in. sieve: 10.7 grams
Individual mass retained on the #4 sieve: 831.9 grams
Individual mass retained on the #8 sieve: 177.3 grams
Individual mass retained on the pan: 16.8 grams
Total mass of sample: 1037 grams
Cumulative percent passing the 1/2 in. sieve:100 %
Cumulative percent passing the 3/8 in. sieve:99 %
Cumulative percent passing the #4 sieve:19 %
Cumulative percent passing the #8 sieve:2 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/13/2020