Summary for Test 2020-01-27-20-4
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 213744 DEA: 080P3904 EFIS: 0800001025 |
---|---|
DIST-CO-RTE-PM | 08-SBD-18-101.5/115.9 |
Award Date | 02/01/2019 |
Closeout Date | 08/16/2023 |
Work Description | WIDEN EXISTING SHOULDER TO 8' AND CONSTRUCT SHOULDER RUMBLE STRIPS |
Location Description | SAN BERNARDINO COUNTY FROM 0.5 MILE WEST OF ROUTE 395 TO 263 RD STREET. |
QA Service Level | 1 (Verified on 05/30/2019) |
Sample Information
Sample Taken Date | 01/27/2020 | Sample Unique Key | 20 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/28/2020 |
Sample type | Verification | A brief description of the sample | 3/4 HMA A SP R12 |
The quantity of what the sample constitutes | PSUE 6 Bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Elias | Last name of sampler or witnessed by | Hamel |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | 0117A-20 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Materials San Bernardino | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0137::CAJON CREEK |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R12 | The fabricator/manufacturer designation for the sample | 224108 SBP SJR |
The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at Vulcan San Bernardino |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-01-27-20
DIME Test ID: 2020-01-27-20-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-03-17
Test Results
Input Type: Measured
Tester's full name: Michael Magana
Date of test: 01/30/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 965.9 grams
Mass of the pycnometer with water (B): 654.3 grams
Mass of the oven dried sample (before pycnometer) (A): 494.1 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 494.1 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.623
Bulk specific gravity (SSD Basis): 2.654
Apparent specific gravity: 2.707
Absorption: 1.2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/17/2020 ✔