Summary for Test 2018-12-04-4-1

Test performed: CTM 673-July 2012

Project Information

Project Identifiers
DEA: No Project
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set

Sample Information

Sample Taken Date12/04/2018 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/06/2018
Sample typeQuality Assurance A brief description of the sample3.75 elastomeric joint seal
The quantity of what the sample constitutes550ft From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)3718432
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size3.75

Test Details

DIME Sample ID: 2018-12-04-4
DIME Test ID: 2018-12-04-4-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2018-12-27

Test Results

Input Type: Measured
Tester's full name: Steve
Date of test: 12/10/2018
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 70.1981 lbs
Width at 4 x Load at W1: 1.56235 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.9495 in
Measured Minimum Uncompressed Width: 3.8915 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.876 in
Height of Contact Face: 3.585 in
Length: no data
Spec Minimum Uncompressed Width: 3.876 in
Area (5 Times of the Height of Contact Face): 17.925 sqin
Half of the Spec Minimum Uncompressed Width: 1.938 in
85 Percent of the Spec Minimum Uncompressed Width: 3.2946 in
3 Times of the Area: 53.775 sqin
4 Times of the Load at W1: 280.792 in
W1 (US Units): 3.295 in
W1 (Metric Units): 83.683 millimeters
W2 (US Units): 1.562 in
W2 (Metric Units): 39.684 millimeters
Satisfactory of MR of (US Units): 1.732 in
Satisfactory of MR of (Metric Units): 43.999 millimeters
Optional W1 Measurement 1: 3.3078 in
Optional W1 Measurement 2: 54.1335 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 12/20/2018