Summary for Test 2018-06-29-13-1

Test performed: CTM 673-July 2012

Project Information

Project Identifiers
DEA: No Project
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set

Sample Information

Sample Taken Date06/29/2018 Sample Unique Key13
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/02/2018
Sample typeQuality Assurance A brief description of the sample5 inch elastic joint seal
The quantity of what the sample constitutes600 ft From where was the sample collectedFabricator
First name of sampler or witnessed byPaula Last name of sampler or witnessed byWilcox
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0918271
Manufacturer(s)Watson Bowman Temperature74
Humidity44 CommentsUnknown
Joint Seal Size5"

Test Details

DIME Sample ID: 2018-06-29-13
DIME Test ID: 2018-06-29-13-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2018-07-31

Test Results

Input Type: Measured
Tester's full name: Brian
Date of test: 07/11/2018
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 94.5474 lbs
Width at 4 x Load at W1: 2.1215 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.2105 in
Measured Minimum Uncompressed Width: 5.1245 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5.12 in
Height of Contact Face: 5.084 in
Length: no data
Spec Minimum Uncompressed Width: 5.12 in
Area (5 Times of the Height of Contact Face): 25.42 sqin
Half of the Spec Minimum Uncompressed Width: 2.56 in
85 Percent of the Spec Minimum Uncompressed Width: 4.352 in
3 Times of the Area: 76.26 sqin
4 Times of the Load at W1: 378.19 in
W1 (US Units): 4.352 in
W1 (Metric Units): 110.541 millimeters
W2 (US Units): 2.121 in
W2 (Metric Units): 53.886 millimeters
Satisfactory of MR of (US Units): 2.231 in
Satisfactory of MR of (Metric Units): 56.655 millimeters
Optional W1 Measurement 1: 4.3558 in
Optional W1 Measurement 2: 76.7684 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 7/24/2018