Summary for Test 2018-03-21-2-1

Test performed: CTM 673-July 2012

Project Information

Project Identifiers
DEA: No Project
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set

Sample Information

Sample Taken Date03/21/2018 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/22/2018
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes1 From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0518173
Manufacturer(s)Watson Bowman Temperature70
Humidity50 CommentsUnknown
Joint Seal Size3.75"

Test Details

DIME Sample ID: 2018-03-21-2
DIME Test ID: 2018-03-21-2-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2018-05-01

Test Results

Input Type: Measured
Tester's full name: Randy
Date of test: 03/22/2018
Temperature: 70 ?F
Humidity: 50 %
Load at W1: 56.2751 lbs
Width at 4 x Load at W1: 1.55764 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.964 in
Measured Minimum Uncompressed Width: 3.877 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.933 in
Height of Contact Face: 3.74 in
Length: no data
Spec Minimum Uncompressed Width: 3.877 in
Area (5 Times of the Height of Contact Face): 18.7 sqin
Half of the Spec Minimum Uncompressed Width: 1.9665 in
85 Percent of the Spec Minimum Uncompressed Width: 3.29545 in
3 Times of the Area: 56.1 sqin
4 Times of the Load at W1: 225.1 in
W1 (US Units): 3.295 in
W1 (Metric Units): 83.704 millimeters
W2 (US Units): 1.558 in
W2 (Metric Units): 39.564 millimeters
Satisfactory of MR of (US Units): 1.738 in
Satisfactory of MR of (Metric Units): 44.14 millimeters
Optional W1 Measurement 1: 3.2955 in
Optional W1 Measurement 2: 56.474 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 4/24/2018