Summary for Test 2023-12-08-3-1
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 994084 DEA: 060U8804 EFIS: 0616000074 |
|---|---|
| DIST-CO-RTE-PM | 06-TUL-99-26.3/27.6 |
| Award Date | 01/23/2023 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT A NEW INTERCHANGE AT COMMERCIAL AVENUE NOW CALLED INTERNATIONAL AGRI-CENTER WAY |
| Location Description | ON STATE ROUTE 99 |
| QA Service Level | 1 (Verified on 03/13/2023) |
Sample Information
| Sample Taken Date | 12/08/2023 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/12/2023 |
| Sample type | Quality Assurance | A brief description of the sample | #9 5'-2" Welded Hoops |
| The quantity of what the sample constitutes | 186 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Adrian | Last name of sampler or witnessed by | Sanchez |
| Title of sampler | Telephone number of sampler | 2137133499 | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | RKR Steel Welding | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L159-278-23 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | SMTL TM5 - Welded Hoops | Production or Authorization Testing | Authorization Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Rebar Heat Number(s) | 1202054150 |
| Hoop Manufacturer Lot Number(s) | 1-2 | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Size | #9 |
| Diameter of Hoop | 5'-2" | Epoxy Coated | No |
| Epoxy Coating Color | NA | Rebar Manufacturer | NUCOR |
| Welding Company | RKR Steel Welding | Coating Standards | Uncoated |
| Weld Type | Flash Welded |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-12-08-3
DIME Test ID: 2023-12-08-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Test Release Date: 2023-12-28
Test Results
Number of Samples: 6
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 12/19/2023
UTM: 400KIP
Temperature: 72 f
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 1 | 9 | 1 | 92997.39 | 92997 | Ok Necking | A Auvinen |
| 2 | 2 | 1 | 9 | 1 | 92705.50 | 92705 | Ok Necking | A Auvinen |
| 3 | 3 | 1 | 9 | 1 | 92228.52 | 92229 | Ok Necking | A Auvinen |
| 4 | 1 | 2 | 9 | 1 | 92340.01 | 92340 | Ok Necking | A Auvinen |
| 5 | 2 | 2 | 9 | 1 | 92119.98 | 92120 | Ok Necking | A Auvinen |
| 6 | 3 | 2 | 9 | 1 | 93377.25 | 93377 | Ok Necking | A Auvinen |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/28/2023 ✔