Summary for Test 2023-12-11-1-1
Test performed: CTM 670-December 2013Project Information
Project Identifiers | Project ID: 994245 DEA: 051H4304 EFIS: 0516000073 |
---|---|
DIST-CO-RTE-PM | 05-SB-101-21.4/21.9 |
Award Date | 03/02/2023 |
Closeout Date | Not set |
Work Description | REPLACE STRUCTURAL CONCRETE BRIDGES. |
Location Description | SANTA BARBARA COUNTY IN GOLETA FROM ROUTE 101/217 SEPARATION TO 0.3 MILE NORTH OF SAN JOSE CREEK BRIDGE |
QA Service Level | 1 (Verified on 09/19/2022) |
Sample Information
Sample Taken Date | 12/11/2023 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/15/2023 |
Sample type | Quality Assurance | A brief description of the sample | #6 X 1'-6" Ultimate Welded Hoops Lot 114 |
The quantity of what the sample constitutes | 4 of 117 | From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Lorenzo | Last name of sampler or witnessed by | Garcia |
Title of sampler | Quality Assurance Inspector | Telephone number of sampler | 17029172503 |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | RKR Steel Welding | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L115-133-23 | Structure unique identifier | |
Structure name |
Material Information
Material Type | SMTL TM5 - Welded Hoops | Production or Authorization Testing | Production Testing |
---|---|---|---|
Service or Ultimate | Ultimate | Rebar Heat Number(s) | 221422 |
Hoop Manufacturer Lot Number(s) | Lot #114 | Material Standard Code | ASTM A706 |
Material Grade | 60 | Rebar Size | #6 |
Diameter of Hoop | 1'-6" | Epoxy Coated | No |
Epoxy Coating Color | NA | Rebar Manufacturer | Cascade Steel |
Welding Company | RKR Steel Welding | Coating Standards | Uncoated |
Weld Type | Flash Welded |
Test Details
DIME Sample ID: 2023-12-11-1
DIME Test ID: 2023-12-11-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Test Release Date: 2023-12-28
Test Results
Number of Samples: 3
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 12/19/2023
UTM: 400KIP
Temperature: 72 f
Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
---|---|---|---|---|---|---|---|---|
1 | 1 | 114 | 6 | 0.44 | 40325.10 | 91648 | Ok Necking | A Auvinen |
2 | 2 | 114 | 6 | 0.44 | 41271.14 | 93798 | Ok Necking | A Auvinen |
3 | 3 | 114 | 6 | 0.44 | 41311.28 | 93889 | Ok Necking | A Auvinen |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/28/2023 ✔