Summary for Test 2023-08-15-78-6
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 994611 DEA: 112N1214 EFIS: 1121000171 |
---|---|
DIST-CO-RTE-PM | 11-SD-94-39.0/R49.9 |
Award Date | 06/06/2023 |
Closeout Date | Not set |
Work Description | MICROSURFACING, SHOULDER BACKING, RUMBLE STRIP, & STRIPING. |
Location Description | SAN DIEGO NEAR POTRERO AND CANYON CITY FROM JUNCTION ROUTE 188 TO 3 MILES EAST OF CAMPO CREEK BRIDGE (BR NO. 57-0118) |
QA Service Level | 1 (Verified on 07/18/2023) |
Sample Information
Sample Taken Date | 08/15/2023 | Sample Unique Key | 78 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/15/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" HMA-A |
The quantity of what the sample constitutes | 24 boxes 6 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Smith |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 9101-PSU | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | |
Sublot number | HMA Mix Number | 320819 Otay Val |
Test Details
DIME Sample ID: 2023-08-15-78
DIME Test ID: 2023-08-15-78-6
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2023-09-27
Test Results
Specified number of passes at 12.7 mm: 15000
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 09/18/2023
Test Temperature: 50 F
HMA Production: Field Plant Produced
Compaction Method: SGC Cylindrical Specimen
Type and Amount of Anti-Stripping Additive: 0
Stripping Inflection Point (Wheel A): >10000
Stripping Inflection Point (Wheel B): >10000
Maximum impression at 5000 passes (left wheel): 1.17 mm
Maximum impression at 5000 passes (right wheel): 1.11 mm
Average impression at 5000 passes (left/right avg): 1.14 mm
Maximum impression at 10000 passes (left wheel): 1.34 mm
Maximum impression at 10000 passes (right wheel): 1.22 mm
Average impression at 10000 passes (left/right avg): 1.28 mm
Maximum impression at 15000 passes (left wheel): 1.45 mm
Maximum impression at 15000 passes (right wheel): 1.32 mm
Average impression at 15000 passes (left/right avg): 1.39 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/27/2023 ✔