Summary for Test 2023-09-14-23-2
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 213404 DEA: 120Q3404 EFIS: 1216000130 Permit Numbers: 1217NMC0723 1218NDP0423 1218NRT0056 |
---|---|
DIST-CO-RTE-PM | 12-ORA-241-13.1/16.7 |
Award Date | 01/03/2018 |
Closeout Date | 08/19/2021 |
Work Description | Construct the Oso PWY bridge and extend SR-241 to connect to Los Patrones PKW. in the County of Orange. Two lanes will be constructed of HMA in each direction on SR-241. Oso Parkway N/B on-ramp and S/B off-ramp gores will be modified to connect to new mainline pavement. improve new overhead signs, |
Location Description | OSO PARKWAY INTERCHANGE, COUNTY OF ORANGE |
QA Service Level | 2 (Verified on 06/05/2018) |
Sample Information
Sample Taken Date | 09/14/2023 | Sample Unique Key | 23 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/15/2023 |
Sample type | Acceptance | A brief description of the sample | 3/4" HMA-A-SP WMA R25 |
The quantity of what the sample constitutes | 8 Boxes of HMA | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Jerid | Last name of sampler or witnessed by | Kupelian |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | HMA-R10 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Fisher Sand & Gravel | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | |
Sublot number | HMA Mix Number |
Test Details
DIME Sample ID: 2023-09-14-23
DIME Test ID: 2023-09-14-23-2
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2023-09-15
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Derek Carrington
Date of test: 09/15/2023
Test procedure used?: Method A
Mass of the specimen basket assembly: 4243.2 g
Mass of the specimen and specimen basket assembly prior to ignition: 6714.5 g
Mass of HMA Sample prior to ignition: 2471.3 g
Mass Loss: 120.4 g
Mass of aggregate remaining after ignition: 2350.9 g
Correction Factor (Percent by mass of HMA Specimen): 0.17 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.00 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 4.70 %
General comments (publicly viewable) (Max 1000 characters): HMA-R10
Test was verified on 9/15/2023 ✔