Summary for Test 2023-07-19-51-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 993629 DEA: 112N0874 EFIS: 1119000220 |
---|---|
DIST-CO-RTE-PM | 11-SD-5,15,76,78-Var |
Award Date | 05/27/2022 |
Closeout Date | 02/27/2024 |
Work Description | PPLY METHACRYLATE, PLACE POLYESTER CONCRETE OVERLAY Apply Methacrylate on bridge deck |
Location Description | SAN DIEGO COUNTY AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 03/21/2022) |
Sample Information
Sample Taken Date | 07/19/2023 | Sample Unique Key | 51 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/20/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" HMA |
The quantity of what the sample constitutes | 8 boxes 3 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Jesse | Last name of sampler or witnessed by | Fuentes |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | N/A |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-07-19-51
DIME Test ID: 2023-07-19-51-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-09-01
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 08/18/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2736 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
127.3 grams | 95 % | |||||
429.6 grams | 84 % | |||||
1175.3 grams | 57 % | |||||
371.3 grams | ||||||
137.5 grams | 36 % | |||||
197.1 grams | 27 % | |||||
250.4 grams | 19 % | |||||
298.7 grams | 11 % | |||||
329.3 grams | 6 % | |||||
350.2 grams | 3.2 % | |||||
351.7 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/1/2023 ✔