Summary for Test 2023-06-15-40-6
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 215666 DEA: 11430564 EFIS: 1119000015 |
---|---|
DIST-CO-RTE-PM | 11-SD-67-R6.0/24.4 |
Award Date | 03/01/2022 |
Closeout Date | Not set |
Work Description | COLD PLANE, RHMA OVERLAY AND HFST, AND INSTALL CHANNELIZERS. |
Location Description | SAN DIEGO COUNTY NEAR LAKESIDE AND RAMONA FROM 0.2 MILE NORTH OF SAN DIEGO RIVER BRIDGE TO ROUTE 78 |
QA Service Level | 1 (Verified on 07/06/2021) |
Sample Information
Sample Taken Date | 06/15/2023 | Sample Unique Key | 40 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/19/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" RHMA-G |
The quantity of what the sample constitutes | 12 boxes 2 bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Jesse | Last name of sampler or witnessed by | Fuentes |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Martin Marietta | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | |
Sublot number | HMA Mix Number | 21218080SR |
Test Details
DIME Sample ID: 2023-06-15-40
DIME Test ID: 2023-06-15-40-6
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2023-07-18
Test Results
Specified number of passes at 12.7 mm: 20000
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 07/17/2023
Test Temperature: 122 F
HMA Production: Field Plant Produced
Compaction Method: SGC Cylindrical Specimen
Type and Amount of Anti-Stripping Additive: 0.5%
Stripping Inflection Point (Wheel A): >12500
Stripping Inflection Point (Wheel B): >12500
Maximum impression at 5000 passes (left wheel): 1.57 mm
Maximum impression at 5000 passes (right wheel): 1.03 mm
Average impression at 5000 passes (left/right avg): 1.3 mm
Maximum impression at 10000 passes (left wheel): 1.97 mm
Maximum impression at 10000 passes (right wheel): 1.22 mm
Average impression at 10000 passes (left/right avg): 1.6 mm
Maximum impression at 15000 passes (left wheel): 2.31 mm
Maximum impression at 15000 passes (right wheel): 1.49 mm
Average impression at 15000 passes (left/right avg): 1.9 mm
Maximum impression at 20000 passes (left wheel): 3.1 mm
Maximum impression at 20000 passes (right wheel): 1.7 mm
Average impression at 20000 passes (left/right avg): 2.4 mm
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/18/2023 ✔