Summary for Test 2023-04-18-107-2
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 215649 DEA: 043G4884 EFIS: 0412000088 |
|---|---|
| DIST-CO-RTE-PM | 04-SM-92-R14.4/R18.8 |
| Award Date | 09/01/2022 |
| Closeout Date | Not set |
| Work Description | CLEAN AND PAINT STEEL BRIDGE TOWERS, REPLACE HIGH STRENGTH BOLTS. |
| Location Description | SAN MATEO COUNTY IN FOSTER CITY FROM SAN MATEO-HAYWARD BRIDGE TO ALAMEDA COUNTY LINE |
| QA Service Level | 1 (Verified on 03/29/2021) |
Sample Information
| Sample Taken Date | 04/18/2023 | Sample Unique Key | 107 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/20/2023 |
| Sample type | Per Request | A brief description of the sample | Bolts |
| The quantity of what the sample constitutes | 3 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Gilel | Last name of sampler or witnessed by | Klebanoc |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Pier 27 North | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | NA | Nut Mfg. Lot Number(s) | |
| Washer Mfg. Lot Number(s) | Bolt Specification | A325 | |
| Bolt Length(s) | 4, 4.5, 4.5 | Nut Specification | NA |
| Washer Specification | NA | Finish | NA |
| Diameter/Size | 0.875 | Bolt Mfg. Lot Number | NA |
| Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-04-18-107
DIME Test ID: 2023-04-18-107-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2023-05-16
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: rmacias
Date of test: 05/16/2023
UTM: 450kip
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 2A | NA | 0.8750 | 64131 | 285.27 | 10.00 | A325 wedge tensile Pier 27 N | rmacias |
General comments (publicly viewable) (Max 1000 characters): A325 wedge tensile Pier 27 N
Test Graph
Source: Bluehill Data Point FileTest was verified on 5/16/2023 ✔