Summary for Test 2023-02-07-28-2
Test performed: ASTM F606-21Project Information
| Project Identifiers | Project ID: 214590 DEA: 043G4744 EFIS: 0412000074 |
|---|---|
| DIST-CO-RTE-PM | 04-MRN,MRN-580-6.9/7.8,0.0/2.5 |
| Award Date | 01/14/2021 |
| Closeout Date | Not set |
| Work Description | CLEAN AND PAINT STRUCTURAL STEEL BRIDGE. |
| Location Description | CONTRA COSTA AND MARIN COUNTIES IN RICHMOND AND SAN RAFAEL FROM 0.8 MILE WEST OF TOLL PLAZA TO 0.1 MILE EAST OF MAIN STREET |
| QA Service Level | 1 (Verified on 02/18/2020) |
Sample Information
| Sample Taken Date | 02/07/2023 | Sample Unique Key | 28 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/22/2023 |
| Sample type | Quality Assurance | A brief description of the sample | A325 HDG Rocap Assembiy |
| The quantity of what the sample constitutes | 1350 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | William | Last name of sampler or witnessed by | Sommer |
| Title of sampler | SR | Telephone number of sampler | 19253304874 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Lejune | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | 28-0100 | |
| Structure name | Richmond San Rafael Bridge |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | L1415000 |
|---|---|---|---|
| Heat Number(s) | Nut Mfg. Lot Number(s) | 36505-5804863904 | |
| Washer Mfg. Lot Number(s) | E2699 WDGHD5 | Bolt Specification | A325 |
| Bolt Length(s) | 2.5 | Nut Specification | A563 |
| Washer Specification | F436 | Finish | HDG |
| Diameter/Size | 5/8 | Bolt Mfg. Lot Number | E083B1 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2023-02-07-28
DIME Test ID: 2023-02-07-28-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Test Release Date: 2023-03-07
Test Results
Number of Bolt Samples: 1
Input Type: Measured
Tester's full name: rmacias
Date of test: 03/01/2023
UTM: 450kip
Temperature: no data
| Num | Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1B | E083B1 | 0.6250 | 31110 | 138.38 | 10.00 | A325 Wedge Tensile | rmacias |
General comments (publicly viewable) (Max 1000 characters): A325 Wedge Tensile
Test Graph
Source: Bluehill Data Point FileTest was verified on 3/7/2023 ✔