Summary for Test 2022-12-07-28-1
Test performed: ASTM C39-17aProject Information
| Project Identifiers | Project ID: 993776 DEA: 040J3004 EFIS: 0413000433 |
|---|---|
| DIST-CO-RTE-PM | 04-SON-1-26.7/27.1 |
| Award Date | 07/08/2022 |
| Closeout Date | Not set |
| Work Description | CONSTRUCTING RETAINING WALL AND CONFINEMENT SYSTEM TO RESTORE SLIPOUT. |
| Location Description | SONOMA COUNTY NEAR JENNER FROM 0.3 MILE TO 0.7 MILE NORTH OF MEYERS GRADE ROAD |
| QA Service Level | 1 (Verified on 05/11/2022) |
Sample Information
| Sample Taken Date | 12/07/2022 | Sample Unique Key | 28 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/07/2022 |
| Sample type | Quality Assurance | A brief description of the sample | 6 Cylinders 4x8 |
| The quantity of what the sample constitutes | 6 Cylinders 4x8 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Fabio | Last name of sampler or witnessed by | La Serna |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Argonaut Constructors | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Concrete | The concrete mix design number | SL-4700CG |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | SL-4700CG | |
| Concrete batch plant | The fabricator/manufacturer designation for the sample | ||
| A detailed description of where the material sample was collected | Jobsite | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-12-07-28
DIME Test ID: 2022-12-07-28-1
Testing Lab: CT HQ - QASI Bay Area Field Office
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2022-12-15
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Nikhil Moon
Date of test: 12/14/2022
Capped in accordance with?: ASTM C1231 - Unbonded Elastomeric Pad Cap
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 78160 lb
Maximum load on cylinder 2: 80170 lb
Maximum load on cylinder 3: 78910 lb
Type of fracture pattern of cylinder 1: 3
Type of fracture pattern of cylinder 2: 3
Type of fracture pattern of cylinder 3: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Correction factor for cylinder 3: 1
Age of specimen: 7 days
Age of specimen in hours: no data
Cross sectional area of cylinder 1: 12.566 in^2
Cross sectional area of cylinder 2: 12.566 in^2
Cross sectional area of cylinder 3: 12.566 in^2
Compressive strength (to nearest 10 psi): 6290 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/15/2022 ✔