Summary for Test 2022-12-14-6-1
Test performed: CTM 231-March 2013Project Information
| Project Identifiers | Project ID: 214993 DEA: 051F5004 EFIS: 0514000003 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-101,135-70.6/71.2;0.1 |
| Award Date | 11/17/2020 |
| Closeout Date | 01/11/2024 |
| Work Description | CONSTRUCT CONCRETE BRIDGE, BRIDGE REMOVAL, COLD PLANE, PLACE HMA. |
| Location Description | SANTA BARBARA COUNTY AT LOS ALAMOS ON ROUTE 101 FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF ROUTE 101/135 SEPARATION AND ON ROUTE 135 AT ROUTE 101/135 SEPARATION |
| QA Service Level | 1 (Verified on 09/03/2020) |
Sample Information
| Sample Taken Date | 12/14/2022 | Sample Unique Key | 6 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/14/2022 |
| Sample type | Acceptance | A brief description of the sample | Class 2 Aggregate Base |
| The quantity of what the sample constitutes | 1000 sq yd | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Salvador | Last name of sampler or witnessed by | Lopez-Zamora |
| Title of sampler | ARET | Telephone number of sampler | 8057483854 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Calportland-Garey | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-42-0014 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | abutment 1 | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-12-14-6
DIME Test ID: 2022-12-14-6-1
Testing Lab: CT D05 - Santa Maria Field Laboratory
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Test Release Date: 2022-12-14
Test Results
Method Type:: Standard Count
Number of Tests:: 3
Common Test Maximum Used:: Yes
Input Type: Calculated
Tester's full name: Salvador Lopez-Zamora
Date of test: 12/14/2022
Sum of Count or Density: 2.27 g/cc
Average of Count or Density: 2.29 g/cc
Sum of Moisture Count: 0.13 g/cc
Average of Moisture Count: 0.18 g/cc
Count Ratio Density: 0.48
Count Ratio Moisture: 0.18
Calculated Percent Relative Compaction: 101.3 %
Reported Percent Relative Compaction: 101 %
General comments (publicly viewable) (Max 1000 characters): 221214B
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 05-1F5004_37041_221214B_Soils compaction_abut1 app slab1_Class 2 AB | 188.93 KB | 12/14/2022 | 2022-12-14-6-1 | Info |
Test was verified on 12/14/2022 ✔