Summary for Test 2022-04-27-26-6

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 215812
DEA: 060U79U4
EFIS: 0620000035
DIST-CO-RTE-PM06-KIN-198-R16.9/R21.9
Award Date08/26/2021
Closeout Date05/10/2023
Work DescriptionCONSTRUCT GORE PAVING, SLOPE PAVING AND IRRIGATION UPGRADES.
Location DescriptionKINGS COUNTY IN AND NEAR HANFORD FROM 12TH AVENUE OVERCROSSING TO 0.9 MILE EAST OF STATE ROUTE 43/198 SEPARATION
QA Service Level1 (Verified on 07/12/2021)

Sample Information

Sample Taken Date04/27/2022 Sample Unique Key26
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/06/2022
Sample typeDepartment Acceptance A brief description of the sampleAsphalt Binder Sample
The quantity of what the sample constitutes1 can From where was the sample collectedSource
First name of sampler or witnessed byG Last name of sampler or witnessed byL
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameSan Joaquin Refinery Transportation Laboratory (TL) Number040337
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 70-10
Modified Lot number1
Sublot number2 Tank number
Time of sample HMA SupplierGranite Construction
Certified Asphalt SupplierSan Joaquin Refinery - Bakersfield CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2022-04-27-26
DIME Test ID: 2022-04-27-26-6
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2022-05-31

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 05/17/2022
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.154 kPa
Phase Angle (δ) (for the 10 cycles): 89.2 degree
Complex Modulus (G*) (for the 10 measurements): 1.543 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 1.54 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO

Test was verified on 5/31/2022