Summary for Test 2022-03-07-12-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 03/07/2022 | Sample Unique Key | 12 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/15/2022 |
Sample type | Verification | A brief description of the sample | 1/2" HMA WMA PG 64-10 with 25% RAP |
The quantity of what the sample constitutes | 6 Bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Erika | Last name of sampler or witnessed by | Gonzalez |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | 22-JMFPP-0030 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Pleasonton | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0010 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-03-07-12
DIME Test ID: 2022-03-07-12-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-03-17
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Jay Horton
Date of test: 03/16/2022
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2173.3 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
116.2 grams | 94.7 % | |||||
388.4 grams | 82.1 % | |||||
934.2 grams | 57 % | |||||
235.7 grams | 32.3 % | |||||
364.0 grams | 18.8 % | |||||
420.3 grams | 12.9 % | |||||
462.9 grams | 8.4 % | |||||
494.8 grams | 5.1 % | |||||
512.3 grams | 3.22 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/17/2022 ✔