Summary for Test 2021-10-12-26-2

Test performed: AASHTO T84-14

Project Information

Project IdentifiersProject ID: 215083
DEA: 07307504
EFIS: 0714000217
DIST-CO-RTE-PM07-LA-101-11.8/31.1
Award Date09/21/2020
Closeout DateNot set
Work DescriptionPLACE RHMA-G, MODIFY RAMP METERING AND SIGNAL AND LIGHTING SYSTEMS.
Location DescriptionLOS ANGELES COUNTY FROM TUJUNGA AVENUE UNDERCROSSING TO LAS VIRGENES ROAD OVERCROSSING
QA Service Level1 (Verified on 11/18/2020)

Sample Information

Sample Taken Date10/12/2021 Sample Unique Key26
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/14/2021
Sample typeVerification A brief description of the samplePSUE 3/4" HMA-A-SP R15, 0.5% LAS
The quantity of what the sample constitutes10 Bags of Aggregate, 1 Bag of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byVictor Last name of sampler or witnessed byPham
Title of sampler Telephone number of sampler
Laboratory sample identification0588A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan Sun Valley Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-19-0035::FISH CANYON QUARRY
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number220831 SVA SJR A detailed description of where the material sample was collectedBelt Cut at Vulcan Sun Valley Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID

Test Details

DIME Sample ID: 2021-10-12-26
DIME Test ID: 2021-10-12-26-2
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-10-25

Test Results


Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 10/16/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 965.9 grams
Mass of the pycnometer with water (B): 653.4 grams
Mass of the oven dried sample (before pycnometer) (A): 489.8 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 489.8 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity:2.612
Bulk specific gravity (SSD Basis):2.667
Apparent specific gravity:2.763
Absorption:2.1 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/25/2021