Summary for Test 2019-09-04-7-5
Test performed: CTM 553-1Project Information
| Project Identifiers | Project ID: 214029 DEA: 07301104 EFIS: 0714000009 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-60,710-710-R2.8/11.8, 24.1/25.1 |
| Award Date | 06/03/2019 |
| Closeout Date | 10/17/2023 |
| Work Description | Roadway ex, place jointed plain concrete pavement & concrete barrieres |
| Location Description | In Los Angeles County at avocado Heights on Route 60 from 0.5 Mile west of Route 60/710 Separation to Route 60/605 Separation AND on Route 710 from 0.5 miles south of Route 710/60 Separation to 0.5 mile north of Route 710/60 Separation. |
| QA Service Level | 1 (Verified on 06/25/2019) |
Sample Information
| Sample Taken Date | 09/04/2019 | Sample Unique Key | 7 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/06/2019 |
| Sample type | Verification | A brief description of the sample | Type III Cement |
| The quantity of what the sample constitutes | 15 lbs | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | NA | Last name of sampler or witnessed by | NA |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | CM194902 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Unknown | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Cementitious | Brand | Mitsubishi |
|---|---|---|---|
| Mill | Cushenbury | Type of Cementitious Material | Type II Cement |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-09-04-7
DIME Test ID: 2019-09-04-7-5
Testing Lab: CT HQ - Sacramento Cement Testing Laboratory
Test Method: CTM 553-1: Method for Testing Thermal Stability of Mortar Made with Hydraulic Cement
Test Release Date: 2019-10-08
Test Results
Input Type: Measured
Tester's full name: Benjamin Lenz
Date of test: 09/12/2019
Cross-sectional area of the specimen: 4 in^2
Age at the time of test: 72 hours
Maximum load at failure of specimen 1, 23 ± 1.7°C for 48h: 3294 lbs
Maximum load at failure of specimen 2, 23 ± 1.7°C for 48h: 3464 lbs
Maximum load at failure of specimen 3, 23 ± 1.7°C for 48h: 3361 lbs
Maximum load at failure of specimen 1, 50 ± 1°C for 48h: 4058 lbs
Maximum load at failure of specimen 2, 50 ± 1°C for 48h: 3968 lbs
Maximum load at failure of specimen 3, 50 ± 1°C for 48h: 4325 lbs
Average of test specimens broken to nearest 50 kPa, 23 ± 1.7°C for 48h: 5800 kPa
Average of test specimens broken to nearest 50 kPa, 50 ± 1°C for 48h: 7100 kPa
Thermal stability ratio: 122
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/8/2019 ✔