Summary for Test 2018-11-01-1-1
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 212697 DEA: 101C3004 EFIS: 1014000145 |
---|---|
DIST-CO-RTE-PM | 10-STA,SJ-99-R20.9/R24.7, 0.0/6.8 |
Award Date | 12/20/2017 |
Closeout Date | 01/04/2021 |
Work Description | RAMP WIDENING, DRAINAGE, RAMP METERS, AND FIBER OPTIC SYSTEM. |
Location Description | STANISLAUS AND SAN JOAQUIN COUNTIES FROM 0.8 MILE SOUTH OF PELANDALE AVENUE OVERCROSSING IN MODESTO TO 0.2 MILE NORTH OF THE NORTH JUNCTION ROUTE 120/99 SEPARATION IN MANTECA |
QA Service Level | 1 (Verified on 01/25/2018) |
Sample Information
Sample Taken Date | 11/01/2018 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/09/2018 |
Sample type | Quality Assurance | A brief description of the sample | F1554 Grade 55 HDG Anchor Bolts |
The quantity of what the sample constitutes | 1 | From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Churchill |
Title of sampler | QA Inspector | Telephone number of sampler | 510-693-3545 |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | AandM Nut and Bolt | Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | L02-082-18 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
---|---|---|---|
Heat Number(s) | 58034038-02 | Nut Mfg. Lot Number(s) | W4624 |
Washer Mfg. Lot Number(s) | 308856 | Bolt Specification | F1554 |
Bolt Length(s) | 55-1/2" | Nut Specification | A563 |
Washer Specification | F436 | Finish | HDG |
Diameter/Size | 2-1/4" | Bolt Mfg. Lot Number | 4386-PPO |
Rocap Test Requirement(s) | Lubricant Requirements(s) | yes |
Test Details
DIME Sample ID: 2018-11-01-1
DIME Test ID: 2018-11-01-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2018-11-21
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Fred
Date of test: 11/08/2018
UTM: 67KIP
Temperature: 72 f
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | 1 | 58034038-02 | 0.5 | 0.196 | 65712 | 89880 | 26.7 | Fred |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for the Sample
Test was verified on 11/14/2018 ✔