DIME - Sample Record for DIME Sample ID 2018-11-01-1

DIME » All Projects » Project - DEA: 101C3004 » Sample 2018-11-01-1 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Los Angeles Field Office

DIME Sample ID 2018-11-01-1

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212697 DEA: 101C3004 EFIS: 1014000145
DIST-CO-RTE-PM	10-STA,SJ-99-R20.9/R24.7, 0.0/6.8
Award Date	12/20/2017
Closeout Date	01/04/2021
Work Description	RAMP WIDENING, DRAINAGE, RAMP METERS, AND FIBER OPTIC SYSTEM.
Location Description	STANISLAUS AND SAN JOAQUIN COUNTIES FROM 0.8 MILE SOUTH OF PELANDALE AVENUE OVERCROSSING IN MODESTO TO 0.2 MILE NORTH OF THE NORTH JUNCTION ROUTE 120/99 SEPARATION IN MANTECA
QA Service Level	1 (Verified on 01/25/2018)

Sample Information

Sample Taken Date	11/01/2018	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	11/09/2018
Sample type	Quality Assurance	A brief description of the sample	F1554 Grade 55 HDG Anchor Bolts
The quantity of what the sample constitutes	1	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Kevin	Last name of sampler or witnessed by	Churchill
Title of sampler	QA Inspector	Telephone number of sampler	510-693-3545
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	AandM Nut and Bolt	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	L02-082-18	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	58034038-02	Nut Mfg. Lot Number(s)	W4624
Washer Mfg. Lot Number(s)	308856	Bolt Specification	F1554
Bolt Length(s)	55-1/2"	Nut Specification	A563
Washer Specification	F436	Finish	HDG
Diameter/Size	2-1/4"	Bolt Mfg. Lot Number	4386-PPO
Rocap Test Requirement(s)		Lubricant Requirements(s)	yes

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2018-11-01-1-1	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Fred	Yes	11/21/2018
2018-11-01-1-2	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Fred	Yes	11/21/2018
2018-11-01-1-3	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Brian Ewing	Yes	11/21/2018
2018-11-01-1-4	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Brian Ewing	Yes	11/21/2018
2018-11-01-1-5	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Brian Ewing	Yes	11/21/2018
2018-11-01-1-6	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Brian Ewing	Yes	11/21/2018
2018-11-01-1-7	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Brian Ewing	Yes	11/21/2018
2018-11-01-1-8	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Brian Ewing	Yes	11/21/2018
2018-11-01-1-9	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Brian Ewing	Yes	11/21/2018
2018-11-01-1-10	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	11/08/2018	Brian Ewing	Yes	11/21/2018

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-11-01-1-1 ASTM A370-15 (Verified)
DIME Test ID: 2018-11-01-1-2 ASTM A370-15 (Verified)
DIME Test ID: 2018-11-01-1-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-11-01-1-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-11-01-1-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-11-01-1-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-11-01-1-7 ASTM B499-14 (Verified)
DIME Test ID: 2018-11-01-1-8 ASTM B499-14 (Verified)
DIME Test ID: 2018-11-01-1-9 ASTM B499-14 (Verified)
DIME Test ID: 2018-11-01-1-10 ASTM B499-14 (Verified)
DIME Test ID: 2018-11-01-1-11 ASTM B499-14 (Verified)
DIME Test ID: 2018-11-01-1-12 ASTM E18-15 (Verified)
DIME Test ID: 2018-11-01-1-13 ASTM E18-15 (Verified)
DIME Test ID: 2018-11-01-1-14 ASTM E18-15 (Verified)